V-BELTS DOUBLE SIDE AA-BB-CC
PIX BB71 IS A DOUBLE SIDED V-BELT, 75.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
PIXBB71 >
PIX BB55 IS A DOUBLE SIDED V-BELT, 59.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB55>
PIX BB270 IS A DOUBLE SIDED V-BELT, 274.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB270 >
PIX BB195 IS A DOUBLE SIDED V-BELT, 199.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
PIXBB195 >
PIX BB-90 IS A DOUBLE-SIDED V-BELT, 94.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB90 >
PIX BB-81 IS A DOUBLE-SIDED V-BELT, 85.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB81 >
PIX BB-72 IS A DOUBLE-SIDED V-BELT, 76.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB72 >
PIX BB-60 IS A DOUBLE-SIDED V-BELT, 64.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB60 >
PIX BB-180 IS A DOUBLE-SIDED V-BELT, 184.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB180>
PIX BB-155 IS A DOUBLE SIDED V-BELT, 159.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB155>
PIX BB-150 IS A DOUBLE-SIDED V-BELT, 154.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
DOUBLE-V V-BELT OUTSIDE CIRCUMFERENCE 153-PIXBB150 >
PIX BB-118 IS A DOUBLE-SIDED V-BELT, 122.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB118 >
PIX BB-112 IS A DOUBLE-SIDED V-BELT, 116.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB112 >
PIX B70 IS A CLASSICAL V-BELT, 73" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXBB70 >
PIX AA-70 IS A STANDAR V-BELT, SECTION AA, 73.4"OC, 1/2" BELT WIDTH
DESIGNED FOR SERPENTINE DRIVES WITH ONE OR MORE REVERSE BENDS WHICH REQUIRE POWER TRANSMITTED FROM BOTH SIDES. IDEALLY SUITED TO HANDLE TOUGH APPLICATIONS SUCH AS AGRICULTURAL, TEXTILE, AND PRINTING MACHINERY. HIGH STRENGTH POLYESTER TENSILE CORDS. DESIGNED FOR LOW HEAT BUILD UP TO EXTEND BELT LIFE.
-PIXAA70 >
PIX AA-51 IS A 51" PITCH LENGTH, 13MM WIDTH, 8MM THICK , JLS STANDARD A-SECTION RUBBER DRIVE TRANSMISSION BELT.
DESIGNED FOR SERPENTINE DRIVES WITH ONE OR MORE REVERSE BENDS WHICH REQUIRE POWER TRANSMITTED FROM BOTH SIDES. IDEALLY SUITED TO HANDLE TOUGH APPLICATIONS SUCH AS AGRICULTURAL, TEXTILE, AND PRINTING MACHINERY. HIGH STRENGTH POLYESTER TENSILE CORDS. DESIGNED FOR LOW HEAT BUILD UP TO EXTEND BELT LIFE.
-PIXAA51 >
PIX AA-120 IS A DOUBLE ANGLED REPLACEMENT HEX BELT, 123.4 OC, 0.5 TOP WIDTH, 0.390625 BELT DEPTH SINGLE BAND
DESIGNED FOR SERPENTINE DRIVES WITH ONE OR MORE REVERSE BENDS WHICH REQUIRE POWER TRANSMITTED FROM BOTH SIDES. IDEALLY SUITED TO HANDLE TOUGH APPLICATIONS SUCH AS AGRICULTURAL, TEXTILE, AND PRINTING MACHINERY. HIGH STRENGTH POLYESTER TENSILE CORDS. DESIGNED FOR LOW HEAT BUILD UP TO EXTEND BELT LIFE.
- PIXAA120>
JASON CC81 CC SECTION DOUBLE CLASSICAL V-BELT 7/8-" WIDE, 11/16-" THICK
CC SERIES 7/8" DOUBLE SIDED HEXAGON BELT. ESPECIALLY DESIGNED FOR SERPENTINE AND REVERSING DRIVES DOUBLE V-BELTS TRANSMIT POWER FROM BOTH SIDES OF THE BELT. POLYESTER CORDS AND COTTON/POLYESTER COVER PROVIDE MAXIMUM STRENGTH AND LENGTH
-JASCC81>
JASON BB94 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
RAW EDGE COGGED V-BELT; 21/32 WIDTH, 103" BELT OUTSIDE LENTH, 1 BAND, POLYESTER TENSILE MATERIAL, RUBBER OUTER MATERIAL.
-JASBB94 >
JASON BB85 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
CLASSICAL DOUBLE-SIDED V-BELT-BB, 21/32 IN. TOP WIDTH, 1 STRAND, 89.7.6 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
-JASBB85>
JASON BB71 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
CLASSICAL DOUBLE-SIDED V-BELT-BB, 21/32 IN. TOP WIDTH, 1 STRAND, 75.6 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
-JASBB71 >
JASON BB60 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
CLASSICAL DOUBLE-SIDED V-BELT-BB, 21/32 IN. TOP WIDTH, 1 STRAND, 64.6 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
-JASBB60 >
JASON BB162 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
CLASSICAL DOUBLE-SIDED V-BELT-BB, 21/32 IN. TOP WIDTH, 1 STRAND, 167 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
JASBB162 >
JASON BB118 BB SECTION DOUBLE CLASSICAL V-BELT. 21/32 " WIDE, 17/32-" THICK
CLASSICAL DOUBLE SIDED V-BELT-BB, 21/32 IN. TOP WIDTH, 1 STRAND, 122.6 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
--JASBB118 >
Recently Viewed
Unity Manufacturing's nationwide network of sales representatives are your source for type 1, 3, and 3R electrical enclosures and custom, engineered-to-order solutions. Our robust inventory levels enable us to meet even the most challenging and immediate customer needs with speed, accuracy and reliability.
The Grey Pneumatic 1" Drive x 23mm Standard Socket (4023M) is a reliable and versatile tool designed for professional and DIY use. Crafted from high-quality chrome-molybdenum steel and heat treated for exceptional strength and durability, this socket is built to withstand the demands of heavy-duty applications.
KEY FEATURES AND BENEFITS:
Impact Grade: Designed to handle the high torque and shock loads generated by impact wrenches.
6-Point Design: Provides a secure grip and reduces the risk of rounding off fasteners.
High-Quality Chrome-Molybdenum Steel: Offers strength, durability, and resistance to wear and tear.
Heat Treated: Enhances hardness and toughness for optimal performance.
Hard Stamped Size Markings: Allows for easy identification and selection.
Black Oxide Coating: Protects against rust and corrosion.
Increased Torque Capacity: Allows for up to 20% more torque compared to other impact sockets.
Thinner Socket Walls: Improves access to tight spaces.
SPECIFICATIONS:
Drive: 1 inch
Socket Size: 23mm
Length: Standard
Point: 6-point
Material: Chrome-molybdenum steel
Finish: Black oxide
Save space in your toolbox with the Stanley® 6-Way Quick Change Interchangeable Screwdriver. This versatile screwdriver includes standard and Phillips® tips and two nut drivers. The handle is ergonomically designed for comfort and strain-free use.
27-MM 12-PT LONG COMBO WRENCH-ARS52477>
Pacific Handy Cutterâ„¢ SP017 High Quality Blade, Carbon Steel, Utility Blade, 1.69 in L 0.74 in W Blade, 0.017 in THK
The SP-017 Blade features safety Pt. for added safety. While the blade is still extremely sharp, the blunted safety tips help prevent puncture wounds and damaged merchandise. The blade is designed to easily slice corrugated boxes and a great variety of other materials. This blade fits most safety cutters at Pacific Handy Cutter including the S4, S4S, S5, S7, S8, EZ1, EZ2+, EZ4, EZ7, GSC3, RZ3 and EZ3. The blades are packaged in a box of 100 blades and placed into paper tucks of five. For added convenience and safety the SP-017 Blades can also be purchased in our SPD-017 Blade Dispenser.
The Grey Pneumatic 3/4" Drive x 20mm Standard Socket (3020M) is a premium-quality socket designed for demanding tasks in automotive, industrial, and construction settings. Crafted from heat-treated chrome molybdenum steel, this socket delivers exceptional durability and strength. Its innovative design ensures optimal torque transfer and improved accessibility in tight spaces.
KEY FEATURES AND BENEFITS:
Superior Durability: Constructed from heat-treated chrome molybdenum steel for exceptional strength and longevity.
Enhanced Torque Transfer: Optimized design for efficient power transmission, allowing for increased torque application.
Improved Accessibility: Thinner socket walls provide better access to hard-to-reach areas.
Reduced Fastener Damage: Precision-engineered grip ensures minimal risk of rounding off or damaging fasteners.
Versatile Applications: Suitable for a wide range of automotive, industrial, and construction tasks.
SPECIFICATIONS:
Drive Size: 3/4 inch
Socket Size: 20 millimeters
Material: Chrome-molybdenum alloy steel
Length: 52 millimeters
Bolt Clearance Depth: 27 millimeters
Socket Depth: 14 millimeters
Type: High torque, 6-point, standard length, metric, hex
Packaging: Poly bag with barcode
