5-VX-500/11 PIX BELTS
11-GROOVE BANDED 5-VX-500 V-BELT - PIX5VX500/11>
Recently Viewed
5-VX-500/11 PIX BELTS
11-GROOVE BANDED 5-VX-500 V-BELT - PIX5VX500/11>
24 TOOTH TAPER-LOCK SPROCKETS FOR #50 CHAIN
GEARWRENCH® 9024 Open End Regular Length Combination Wrench, 3/4 in Wrench, 12 Points, 0/15 deg Offset, 9.764 in OAL, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
1-1/4" VINYL COATED BODY CLAMPS-GVIRBC11/4X3/8 >
Browning® 1296524 T55L Automatic Torque Limiter, 1-3/8 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
DRILLCO 400N127 Type B Heavy Duty Jobber Length Drill Bit, 27/64 in Drill - Fraction, 0.4219 in Drill - Decimal Inch, 135 deg Point, HSS, Oxide Treated
Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.
