PIX 3-VX-1060/05 COGGED EDGE BANDED V-BELT, 3/8" X 106"X 5/16 IN THICKNESS, 1 RIB
THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>
Recently Viewed
PIX 3-VX-1060/05 COGGED EDGE BANDED V-BELT, 3/8" X 106"X 5/16 IN THICKNESS, 1 RIB
THE 3VX1060/05 BANDED V BELT IS INTERCHANGEABLE WITH 5/3VX1060, 5-3VX1060 & 5GB3VX1060. WEDGE BELTS ARE ABLE TO PRODUCE MUCH HIGHER HORSEPOWER RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. THIS IS IMPROVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
- PIX3VX1060/05>
The latest innovation in abrasive products, surface conditioning discs are tough non-woven nylon suited for conditioning metal, wood or plastic. The can be used to deburr, blend welds and clean surfaces. There web-like construction conforms to surface shapes and gets into corners and irregular surfaces where other discs can not. Disc changes are quick with the hook and loop backing attachment system.
1000# PAIR FOLDING SAW HORSES-JWH32754>
Leviton® 88021 Standard Size Combination Wall Plate, 3 Gangs, 6.38 in W x 4.5 in H, Thermoset, White
Leviton® 88021 Standard Size Combination Wall Plate, 3 Gangs, 6.38 in W x 4.5 in H, Thermoset, White
BBI 455577 Fully Threaded Cap Screw, 7/8-9, 1-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455577 Fully Threaded Cap Screw, 7/8-9, 1-3/4 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
MORSE® 11606 1340B General Purpose Jobber Length Drill Bit, #32 Drill - Wire, 0.116 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
