AX-80 JASON INDUSTRIAL PRODUCTS
NOTCHED GRIP V-BELT - JASAX80>
Recently Viewed
NOTCHED GRIP V-BELT - JASAX80>
Gates® Power Transmission PowerGrip® HTD® 252-3M-15 Synchronous Belt, 15 mm W, 252 mm OAL, 3 mm Pitch, 84 Teeth, Neoprene
PowerGripâ„¢ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
JASON AX55 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 57" OUTSIDE LENGTH
V-BELT, RUBBER, 1/2" X 57" OC. THE LOWER COMPRESSION SECTION OF THE BELT IS MADE OF HIGHLY FIBER REINFORCED, OIL AND HEAT RESISTANT.
-JASAX55 >
8-MM-PITCHX2400-MM TIMING BELT-JAS24008M50 >
Koyo HJ-182620 Inch Series Caged Heavy Duty Needle Roller Bearing, 1-1/8 in Dia Bore, 1-5/8 in OD, 1-1/4 in W, 10100 lbf Dynamic/15800 lbf Static Load
Heavy duty needle roller bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
JAS730H075>
