JASON AX61 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 63" OUTSIDE LENGTH
OIL AND HEAT RESISTANT. STATIC DISSIPATING. RMA SPEC MULTIPLE V-BELTS IN A RAW EDGE COGGED CONSTRUCTION ARE ESPECIALLY USEFUL FOR HIGH-SPEED COMPACT DRIVES. THESE BELTS ALL HAVE THE UNIMATCH FEATURE. RAW EDGE COGGED MULTIPLE V-BELTS ARE LISTED BY INDUSTRY NUMBER IN WHICH THE FIRST LETTER INDICATED BELT SECTION THE X IS A COGGED CONSTRUCTION AND THE NUMBER IS BELT INSIDE LENGTH IN INCHES. INSIDE LENGTH PLUS 2 " EQUALS OUTSIDE LENGTH
"-JASAX61 >
Recently Viewed
JASON AX61 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 63" OUTSIDE LENGTH
OIL AND HEAT RESISTANT. STATIC DISSIPATING. RMA SPEC MULTIPLE V-BELTS IN A RAW EDGE COGGED CONSTRUCTION ARE ESPECIALLY USEFUL FOR HIGH-SPEED COMPACT DRIVES. THESE BELTS ALL HAVE THE UNIMATCH FEATURE. RAW EDGE COGGED MULTIPLE V-BELTS ARE LISTED BY INDUSTRY NUMBER IN WHICH THE FIRST LETTER INDICATED BELT SECTION THE X IS A COGGED CONSTRUCTION AND THE NUMBER IS BELT INSIDE LENGTH IN INCHES. INSIDE LENGTH PLUS 2 " EQUALS OUTSIDE LENGTH
"-JASAX61 >
2" -FEMALE PIPE THREADX1-1/2" -FEMALE PIPE THREAD BLACK REDUCER-JPW2X11/2BR >
1" X 5" RED HD RECT DIE SPRINGS-LANSHDR1000500 >
Drillco 77A128C 7700 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 7/16 in Dia Shank, 2-3/4 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
MORSE® 59317 5961 Center Cutting Regular Length Single End End Mill, 4.5 mm Dia Cutter, 14 mm Length of Cut, 4 Flutes, 5 mm Dia Shank, 51 mm OAL, Bright
TUNGSTEN CARBIDE BURR, 3/8" TREE RADIUS (SF-3) WITH 1/4" SHANK. MAXRPM: 70.000. SHANK MOUNTED TUNGSTEN CARBIDE BURRS ARE DOUBLE CUT FOR FINE WORK
