JASON 5-RC-105 CONVENTIONAL BANDED V-BELT C TYPE, 7/8 " WIDE X 105 " LONG X 5 RIBS
OUTSIDE LENGTH OF 109 "ES, 5 RIBS, MADE OF NR/SBR. THE DRIVE BELT IS THE MOST RELIABLE AND EFFICIENT. THIS BELT TRANSMITS POWER SMOOTHLY AND EFFICIENTLY DUE TO ITS CAREFUL CONSTRUCTION AND RESISTANCE TO WEAR AND TEAR.
-JAS5RC105>
Recently Viewed
JASON 5-RC-105 CONVENTIONAL BANDED V-BELT C TYPE, 7/8 " WIDE X 105 " LONG X 5 RIBS
OUTSIDE LENGTH OF 109 "ES, 5 RIBS, MADE OF NR/SBR. THE DRIVE BELT IS THE MOST RELIABLE AND EFFICIENT. THIS BELT TRANSMITS POWER SMOOTHLY AND EFFICIENTLY DUE TO ITS CAREFUL CONSTRUCTION AND RESISTANCE TO WEAR AND TEAR.
-JAS5RC105>
1/2" -FEMALE PIPE THREAD GALVANIZED TEE-JPW1/2GT >
NEEDLE BEARING INNER RACES - TORIR2020OH>
Browning® 1045517 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
United Abrasives-SAIT Saitlam Fâ„¢ 73980 Close High Performance Coated Abrasive Flap Disc, 4-1/2 in Dia, 7/8 in Center Hole, 80 Grit, Medium Grade, Zirconia Alumina Abrasive, Type 29 Conical Disc
1-1/2" STAINLESS STEEL 90 DEGREE WELD ELBOW-FIT11/2SSEWELD >
