JASON 2RB195 B SECTION NATURAL RUBBER BANDED V-BELTS, 21/32" TOP WIDTH, 13/32" THICK, 195 INSIDE LENGTH 2 RIBS
V-BELT, 2 RIBS, CONSISTENT PERFORMANCE IN MULTIPLE V-BELT DRIVE. NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER AND COMING OFF. OIL AND HEAT RESISTANT
-JAS2RB195>
Recently Viewed
JASON 2RB195 B SECTION NATURAL RUBBER BANDED V-BELTS, 21/32" TOP WIDTH, 13/32" THICK, 195 INSIDE LENGTH 2 RIBS
V-BELT, 2 RIBS, CONSISTENT PERFORMANCE IN MULTIPLE V-BELT DRIVE. NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER AND COMING OFF. OIL AND HEAT RESISTANT
-JAS2RB195>
CrosbyĀ® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
CrosbyĀ® 1031617 HG-226 Turnbuckle, Eye/Eye, 1 in Thread, 10000 lb Working, 24 in Take Up, 40.6 in L Close, Steel
MilwaukeeĀ® 48-22-4046 Straight Jobsite Scissor, 9.3 in OAL, Coated Steel Blade, Steel Handle
The MILWAUKEEĀ® Jobsite Straight Scissors feature all-metal handles for added durability and up to 10X Longer Life. The construction scissors include a smooth cutting edge for burr-free cuts. Bolt Lock Technology prevents blades from loosening to ensure precision cutting. For added precision, ruler markings are on the front of the blades. Milwaukee backs these durable scissors with a limited lifetime warranty.
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
MorseĀ® 465702 TL Series Torque Limiter, 5/8 in Straight Bore, 2-1/2 in OD, 5 to 20 in-lb Torque
The MorseĀ® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The MorseĀ® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the MorseĀ® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J4 >
