V-BELTS BANDED 3V-5V-8V
R-5-VX-1900-4 4-grv Banded 5-vx-1900
4-GRV BANDED 5-VX-1900 V-BELTS-DAYR5VX19004>
R-5-V-1320-4 4-grv Banded 5-v-1320
4-GRV BANDED 5-V-1320 V-BELTS-DAYR5V13204>
R-3-VX-750-2 2-grv Banded 3-vx-750
2-GRV BANDED 3-VX-750 V-BELTS-DAYR3VX7502>
PIX 5-V-1600/04 NARROW WEDGE WRAPPED INDUSTRIAL V-BELT, 160" OC, 4 BANDS
4-GRV BANDED 5-V-1600 V-BELT 160"-PIX5V1600/04 >
PIX 3-V-900/02 3/8" X 90" 3V SECTION WEDGE BANDED V-BELT
3V900/02 BANDED B BELT IS INTERCHANGEABLE WITH BELT NUMBERS 2-R3V900, R3V900-2 & 2/3V900. WEDGE BANDED V BELTS ARE ABLE TO PRODUCT HP RATINGS OVER STANDARD V BELTS WITH THE SAME WIDTH. HIGH HP RATINGS IS ACHIEVED BY THE DIMENSIONAL CHANGES, SPECIAL TREATED POLYESTER CORD AS WELL AS OPTIMUM CORD PLACEMENT. BANDED V BELTS USE A SPECIAL HIGH STRENGTH TIE BAND THAT CREATES A PERMANENT MATCHED SET THROUGHOUT ALL BANDS, WHICH IMPROVES THE LOAD DISTRIBUTION.
-PIX3V900/02 >
JASON 8-V-1700 UNIMATCH BANDED DEEP WEDGE V-BELTS, 8V SECTION, NATUAL RUBBER, 170" LONG, 2 RIBS, 1" TOP WIDTH, 7/8" THICK
HIGH POWER CAPABILITY WITH A MORE COMPACE DRIVE, BANDED CONSTRUCTION OF FABRIC/NEOPRENE TOP BAND ENHANCES STABILITY AND PREVENTS BELTS FROM TURNING OVER OR COMING OFF OF THE DRIVE. OIL & HEAT RESISTANCT. THE CORD IS MADE OF POLYESTER, THE COVER OF COTTON /POLYESTER BLEND
-JAS8V1700>
JASON 5R5V1320 WEDGE BANDED V-BELT, 5/8 " TOP WD X 132" OL X 17/32" THICK, X5 BANDS
OIL AND HEAT RESISTANT, STATIC DISSIPATING. A RAW EDGE, COGGED CONSTRUCTION FURTHER INCREASES THE EFFECTIVE POWER TRANSMISSION OF DEEP WEDGE V-BELTS.
- JAS5R5V1320>
JASON 4R3V900 4-GROOVE BANDED V-BELT, 3/8" X 90 OC
COGGED, 4 RIB 3/8" TOP WIDTH, 21/64" DEPTH, 90" OUTSIDE LENGTH 3/8" TOP WIDTH, SECTION 3VX.
-JAS4R3V900 >
JASON 3-V-830 RUBBER 83" RUBBER V-BELT. LENGTH X 0.38" WIDTH X 0.31" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS
-JAS3V830>
8-V-2120/05 PIX BELTS
5-GRV BANDED 8-V-2120 V-BELT 212"-PIX8V2120/05 >
Recently Viewed
6-1/4 AMP 500 VOLT MIDGET TIME DELAY FUSES-LITFLQ61/4>
Thread Size: 3/4"-10Shank Length: 2 inches Eye Dimensions: 1-1/2" Inner Diameter (ID) | 2-13/16" Outer Diameter (OD)Working Load Limit (WLL): 6,000 lbs. (Straight lift) | 1,500 lbs. (45-degree angle) Pattern: Shoulder pattern (designed to support angular loads better than plain eye
3/4" - OPENED SPHERICAL PLAIN BEARING-AURGEZ012ES >
Keep your pliers and screwdrivers nearby with this tool holder. Perfect for carrying pliers and other tools safely and comfortably. Pockets for 7-Inch, 8-Inch or 9-Inch (17.8 cm,20.3 cm or 22.9 cm) side-cutting pliers and most sized screwdrivers.
Knipex® 95 12 200 SBA Cable Shear, 50 sq-mm, 1 AWG Cable/Wire, 200 mm OAL
Knipex® 95 12 200 SBA Cable Shear, 50 sq-mm, 1 AWG Cable/Wire, 200 mm OAL
Length: 0.15"
Width: 3.59"
Height: 2.91"
