PIX B216 IS A CLASSICAL V-BELT, 219" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PIX B221 IS A CLASSICAL V-BELT, 224" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
-PIXB216 >
Recently Viewed
PIX B216 IS A CLASSICAL V-BELT, 219" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
PIX B221 IS A CLASSICAL V-BELT, 224" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
-PIXB216 >
PIX A-102 IS ACLASSICAL V-BELT, 104" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT , ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA102 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB103K>
2-3/16"-ID SPH/OD INSERT BEARINGS -MBUVS235 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB100K>
THESE BELTS FOLLOW A CLASSICAL V-BELT PROFILE, WHICH ENSURES COMPATIBILITY WITH A VARIETY OF STANDARD PULLEY SYSTEMS. THE WRAPPED CONSTRUCTION PRVIDES ENHANCED PROTECTION AGAINST ENVIRONMENTAL FACTORS. THEY ARE MADE OF RUBBER COMPOUNDS AND STRONG TENSION MEMBERS. THEY ARE RESISTANT TO HEAT AND OIL AND STATIC.
-PIXC120 >
