"PIX A60K--TOP WIDTH- 0.5"" , 5/16"" THICKNESS, 62"" OC, KEVLAR © "
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA60K>
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA60K>
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB86K >
GARAGE DOOR SIDE LOCKS-NTL280727 >
2" WATERTIGHT HUB-ELEWH200 >
2-1/2" STANDARD MUFFLER CLAMPS-NIK85039 >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES . IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA52K>
