TIMING BELTS
1200-8-M-14 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M14>
1200-8-M-15 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M15>
1200-8-M-16 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M16>
1200-8-M-20 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1200-MM TIMING BELT-JAS12008M20 >
1200-8-M-22 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M22>
1200-8-M-25 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M25>
1200-8-M-30 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1200-MM TIMING BELT-JAS12008M30 >
1200-8-M-35 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M35>
1200-8-M-40 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 1200-MM TIMING BELT - JAS12008M40>
1200-8-M-50 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1200-MM TIMING BELT-JAS12008M50 >
1200-8-M-85 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1200-MM TIMING BELT-JAS12008M85 >
1230 FHP V-belt (3-l-230) Outside Circumference 23."
FHP V-BELT (3-L-230) OUTSIDE CIRCUMFERENCE 23."-GAT1230 >
124-L-050 L-pitch X 12.4" Timing
Gear belt - L, 0.3750 in Pitch, 124 mm Pitch Length, 0.5 Width, 33 Teeth, Neoprene Material
124-L-100 L-pitch X 12.4" Timing
Gear belt - L, 0.3750 in Pitch, 12.3750 in Overall Length, 1.0000 in Width, 33 Teeth, Neoprene Material
1250 FHP V-belt (3-l-250) Outside Circumference 25."
FHP V-BELT (3-L-250) OUTSIDE CIRCUMFERENCE 25."-GAT1250 >
1250-H-150 H-pitch X 110" Timing
Gear belt - H, 0.5000 in Pitch, 125.0000 in Overall Length, 1.5000 in Width, 250 Teeth
Molded Teeth - Shear resistance teeth designed to provide smooth positive engagement with gearbelt pulleys. High Tensile Cord - Specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt. Compression Section - Bonds to belt cords for protections against dirt, grease, oil, ozone, and other environmental hazards.
Recently Viewed
1-15/16" -ID R-1-STYLE BUSHING-IDCR1115/16 >
NOTCHED GRIP V-BELT >35.5"-JAS3VX355 >
Browning 2-3/16"-ID BB TAKE-UP BEARING UNIT BRW VTWS-335
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
3/8" -16" USS TAPER HAND TAP-PDTEK506163T >
FUEL FILTERS
PIX A-75/02 IS A CLASSICAL V-BELT 77" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 2 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA75/02 >
