TIMING BELTS
180-XL-037 Xl-pitch X 18" Timing
XL, 0.2000 in Pitch, 180 mm Pitch Length, 0.375 Width, 90 Teeth, Neoprene Material
1800-8-M-20 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M20 >
1800-8-M-22 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M22 >
1800-8-M-25 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M25 >
1800-8-M-30 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M30 >
1800-8-M-50 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M50 >
1800-8-M-85 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX1800-MM TIMING BELT-JAS18008M85 >
Recently Viewed
2.756X3.543X.393 OIL SEAL
HCI Preferred Supplier 28220L Hex Light Pattern Reducing Nipple, 1/4 x 1/8 in Nominal, 1 in L, Brass, MNPT End Style
HCI Preferred Supplier 28220 Hex Reducer Nipple, 1/4 x 1/8 in Nominal, 1.19 in L, Brass, MNPT End Style
JASON 430H200 SYNCHRONOUS BELT, 1/2 " PITCH; 43" PITCH LENGTH 1-1/2" BELT WIDTH. 86 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS430H100 >
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics, and wood. The coarse grade is perfect for use on concave, convex, and flat surfaces. The two-sided files are rounded on 1 side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.
MORSE® 10112 1302 General Purpose Taper Shank Drill Bit, 2 in Drill - Fraction, 0.0787 in Drill - Decimal Inch, #5 Morse Taper Shank Taper, HSS
