TIMING BELTS

UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS255L100 >

HIGH QUALITY AND DURABLE BELT MADE FROM HIGH QUALITY RUBBER WITH FIBERGLASS REINFORCEMENT. THE BELTS HAVE PRECISE POWER TRANSMISSION WITH A 5 MM PITCH AND TRAPEZOIDAL TOOTH PROFILE. THEY OFFER LOW NOISE AND SMOOTH OPERATION.
JAS260XL037 >

UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
-JAS270L050 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE NYLON TOOTH COVER, MADE OF CHLOROPRENE
- JAS28008M30>

RPC TOOTH PROFILE, REDUCED BELT AND PULLEY WIDTH PRODUCT LESS NOISE, REDUCES DRIVE WEIGHT, BEARING LOAD AND COST. GREATER LENGTH RANGE, THE HNBR CAUSES HIGH RESISANCE TO PETROLEUM OILS AND SOLVENTS MADE OF TENSILE CORD.
-JAS280014M55 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
JAS280H075 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS270L100 >

FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY. CHLOROPRENE BELT BODY, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS280H200 >

UNIVERSAL TRAPEZOID TOOTH PROFILES DROP INTO EXISTING SPROCKETS, HIGH-GRADE COMPOUNDING. FIBERGLASS TENSION CORDS FOR EXCELLENT RESISTANCE TO SHRINKAGE.ELONGATION. OIL, HEAT, OZONE, AND ABRASION RESISTANT.
JAS285L100 >

A HARD WEARING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES. -JAS3003M06 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
JAS300H100 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL H-PITCHX30" TIMING BELT-JAS300H150 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS300H200 >

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS300L050 >

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS300L100 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS320H075 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER T0 THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS320H100 >

STANDARD TIMING TOOTH PROFILE; L; FIBERGLASS TENSILE MATERIAL; RUBBER OUTER MATERIAL.
-JAS345L150 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H100 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >

SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS367L050 >

A HARD WEATING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES.
-JAS3755M15 >

BELT IS 384MM PITCH LENGTH, 128 TEETH, PITCH:3MM WIDTH;09, TOTAL HEIGHT 240MM, TOOTH HEIGHT:1.22 MM
-JAS3843M09 >

THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >