TIMING BELTS
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M30>
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M25>
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M20>
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M15>
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M12>
H-PITCH X 75" TIMING BELTS-BRW750H300>
H-PITCHX75" TIMING BELT-JAS750H200 >
H-PITCH X 75" TIMING BELTS-BRW750H200>
H-PITCHX75" TIMING BELT-JAS750H150 >
H-PITCH X 75" TIMING BELTS-BRW750H150>
H-PITCHX75" TIMING BELT-JAS750H100 >
H-PITCH X 75" TIMING BELTS-BRW750H100>
JAS750H075>
H-PITCH X 75" TIMING BELTS-BRW750H075>
JAS7505M15>
JAS7405M50>
JAS7405M30>
JAS7405M20>
5-MM-PITCHX740-MM TIMING BELT-JAS7405M15 >
JAS7405M12>
JAS7405M10>
JAS7405M09>
JAS7368M30>
JAS7368M20>
Recently Viewed
7/8" X 16" SPLINE SHANK MASONRY BIT-PWR1443 >
5/8" X 2" USS BUTTON HEAD SOCKET HEAD CAPSCREW-NBS7050620200 >
DOUBLE V-BELT-PIX205513>
Bore Diameter: 15 mm Outside Diameter: 35 mm Width: 11 mm Closure: Double shielded (keeps lubricant in and contaminants out) Load Capacity: Dynamic capacity is roughly 1,750 lb., and static is 843 lb. Interchangeable with: SKF 6202 ZJEM
BAR-RATCHETING WINCH BARS
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA98K>
