760-8-M-12 JASON INDUSTRIAL PRODUCTS
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M12>
Recently Viewed
8-MM-PITCH X 760-MM TIMING BELT - JAS7608M12>
JASON AX59 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 61" OUTSIDE LENGTH
COGGED CLASSICAL V-BELTS. 1/2 " TOP WIDTH, 5/16-" THICK. CONFORMS TO RMA ENGINEERING STANDARD THE LOWER COMPRESSION SECTION OF THE BELT IS MADE OF HIGHLY FIBER REINFORCED, OIL AND HEAT RESISTANT.
-JASAX59 >
NOTCHED GRIP V-BELT OUTSIDE CIRCUMFERENCE 37"-JASAX35 >
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS450H300 >
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL--JAS730H200 >
Browning® 3694569 B5V® Type 15 Arm/Web Multiple Sheave, 1/2 to 1-15/16 in Split Taper Bore, 7.28 in OD, 4 Grooves, 7.1 in (5V)/6.8 in (A)/7.3 in (B) Dia Pitch, 3-5/32 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
