JASON 20008M20 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 20 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M20 >
Recently Viewed
JASON 20008M20 HTB HIGH TORQUE SYNCHRONOUS BELT, CHLOROPRENE, 1.417" TOP WIDTH, 2000 MM LENGTH, 8 MM TOOTH PITCH, 20 MM WIDE
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS20008M20 >
Browning® PB9105 Torque Arm Kit, For Use With TorqTaper® Plus 5:1/9:1/15:1/25:1/35:1 Ratio, 107 SMTP/SMFP Shaft Mounted AGMA Reducer, 24 to 30 in L Torque Arm, 0.38 in Bolt
Browning® PB9105 Torque Arm Kit, For Use With TorqTaper® Plus 5:1/9:1/15:1/25:1/35:1 Ratio, 107 SMTP/SMFP Shaft Mounted AGMA Reducer, 24 to 30 in L Torque Arm, 0.38 in Bolt
Browning® 767377 VPE 200 Normal Duty Pillow Block Ball Bearing, 1-1/4 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
1-15/16" -ID Q-1-STYLE BUSHING-BRWQ1115/16 >
TCM15X35X6TC>
MORSE® 60322 1361T High Performance Jobber Length Drill Bit, 3/8 in Drill - Fraction, 0.375 in Drill - Decimal Inch, 130 deg Point, M35 Cobalt, TiAlN Coated
