1440-8-M-30 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX30-MM X 1440-MM TIMING BELTS -JAS14408M30 >
Recently Viewed
8-MM-PITCHX30-MM X 1440-MM TIMING BELTS -JAS14408M30 >
JASON 280014M55 THE NEXT GENERATION SYNCHRONOUS PLATINUM BELT, HNBR, 2800 MM PITCH LENGTH, 14MM TOOTH PITCH, 55MM WIDE
RPC TOOTH PROFILE, REDUCED BELT AND PULLEY WIDTH PRODUCT LESS NOISE, REDUCES DRIVE WEIGHT, BEARING LOAD AND COST. GREATER LENGTH RANGE, THE HNBR CAUSES HIGH RESISANCE TO PETROLEUM OILS AND SOLVENTS MADE OF TENSILE CORD.
-JAS280014M55 >
Dichtomatik N70112 O-Ring, 112 Dash Number, 0.487 in ID x 0.693 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
8-MM-PITCHX1760-MM TIMING BELTS -JAS17608M22 >
Gates® Power Transmission PowerGrip® 630H100 Heavy Timing Belt, 1 in W, 63 in OAL, 1/2 in Pitch, 126 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1/4" X 48" EYE/EYE WIREROPE SLINGS-SWC8FAB740 >
