JASON 14408M20 8-MM-PITCH X 1440-MM TIMING BELTS
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS14408M20 >
Recently Viewed
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS14408M20 >
JASON AX48 COGGED CLASSICAL V-BELTS. 1/2" TOP WIDTH, 5/16" THICK, 51" OUTSIDE LENGTH
COGGED RAW EDGE V-BELT. POLYESTER CORD REINFORCEMENT. RAW EDGE SIDEWALLS ELIMINATE SLIPPAGE AND INCREASES EFFICIENCY. COGGED DESIGN ALLOWS FOR GREATER HEAT DISSIPATION. THE BELT IS OIL AND HEAT RESISTAND AND CONFORMS TO ARPM STANDARD IP 20
'-JASAX48 >
JASON 430H200 SYNCHRONOUS BELT, 1/2 " PITCH; 43" PITCH LENGTH 1-1/2" BELT WIDTH. 86 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS430H100 >
TAPERED ROLLER BEARING CONE-NTNJLM813049 >
40-B-22-F-3/4 22 Tooth Sprockets For #40
22 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B22F3/4 >
1/2" X 36" HARDWOOD DOWEL ROD - JWH166778 >
