POLY-V V-BELTS J-K-L-M
PIX 500-J-4 POLY RIB J V-BELT, 50" OC, 4 RIBS, 0.092 INCH PITCH 0.37" WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 4 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J4>
PIX 500-J-6 POLY RIB J V-BELT, 50" OC, 6 RIBS, 0.092 INCH PITCH 9/16" WIDTH
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS-HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX500J6 >
PIX 510-J-16 POLY RIB J V-BELT, 51" OC, 16 RIBS,1.47" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES,16 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
- PIX510J16>
PIX 510-J-6 POLY RIB J V-BELT, 51" OC, 16 RIBS,1.47" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES,6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
- PIX510J6>
PIX 520-J-6 POLY RIB J V-BELT, 52" OC 6 RIBS, 0.93" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX520J6 >
PIX 550-J-10 POLY RIB J V-BELT, 55" OC 10 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 10 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J10 >
PIX 550-J-6 POLY RIB J V-BELT, 55" OC, 6 RIBS, 0.92" TOP WIDTH MADE OF EPDM MATERIAL
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX550J6 >
Recently Viewed
27" X 150' ROLL CLEAR CARPET PROTECTOR - JWH270660 >
Master Lock® Combination Lock with Key Control. Equivalent to 1525. 1-7/8 in (48 mm) wide durable stainless steel lock body. 9/32 in (7 mm) Dia, 3/4 in (19 mm) high, 13/16 in (21 mm) wide shackle. Combination different. 3-digital dialing with 1500 combinations for maximum security. Hardened steel shackle for extra cut resistance. commercial boxed packaging, master carton 25. Spec Number (CID): n/a. Without chain. Set size of 1, master carton quantity 25.
Dremel® 83142 Grinding Stone, 3.2 mm Dia Shank
MORSE® 11466 1332 General Purpose Jobber Length Drill Bit, P Drill - Letter, 0.323 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Browning® 1045319 VP Series Type 1 Variable Pitch Sheave, 5/8 in Finished Bore, 3-3/4 in OD, 1 Groove, 2.3 to 3.1 in (3L)/2.6 to 3.6 in (A/4L)/2.8 to 3.8 in (5L/B) Dia Pitch, 21/32 to 1-1/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 087544 Fully Threaded Cap Screw, 3/4-16, 1-1/2 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
3/4" X 1-1/2" SAE GR-5 Hex Head Capscrew
