POLY-V V-BELTS J-K-L-M
880-8-M-30 JASON INDUSTRIAL PRODUCTS
8-MM-PITCHX880-MM TIMING BELT-JAS8808M30 >
JASON 490J6 POLY-V 3/32 " PITCH;49" BELT PITCH LENGTH; 9/16" BELT WIDTH; 6 BANDS;
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS490J6 >
JASON 200J6 MICRO-V BELT, J SECTION, 200J SIZE, 20" LENGTH, 4/7" WIDTH, 6 RIBS
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS200J6 >
JASON 220J8 MICRO RIB POL V-BELT, 22 ", 8 RIB REPLACEMENT BELT FOR APPLIANCES, FITNESS EQUIPMENT & INDUSTRIAL MACHINES
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS220J8 >
JASON 290-J-4 POLY V-BELT 4- RIB LENGTH 29.0" , 3/8" WIDTH
MICRO-V BELT, J SECTION, 4 RIBS, EPDM FOR RESISTANCE TO WEATHER, OILS, WATER, AND SOME SOLVENTS. SHORT PROFILE FOR FLEXIBILITY, REDUCED HEAT BUILDUP AND PERFORMANCE AT HIGHER SPEED. MEETS RMA OIL AND HEAT RESISTANCE STANDARDS AND STATIC CONDUCTIVITY REQUIREMENTS
- JAS290J4>
JASON 340J10 10-RIB POLY-V V-BELT; J10 3/32" X 34"
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS340J10 >
Recently Viewed
MORSE® 44206 4552 Center Cutting Extra Long Length Single End End Mill, 3/4 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6-1/4 in OAL, Bright
12-MM-ID NEEDLE BEARING-INANK12/12>
GEARWRENCH® 68-524G Dead Blow Hammer, 13 in OAL, 1-1/2 in Dia Ball Peen Face, 1.4 lb Steel Head, Polyurethane Handle
We offer a broad line of polyurethane dead blow hammers in ball pein, standard one-piece, slim line one-piece, and sledge head one-piece types, all built with the strength and innovation that define GEARWRENCH. Each hammers' head contains a canister full of steel shot that creates a dead blow effect, sustaining impact, maximizing force, reducing rebound, and absorbing the shock of impact. The handles are reinforced with steel for strength and also feature a knurled texture for improved grip. The flanged back end of the handle won't slip past your grip. The ball pein type has a steel face and pein which allows for conventional use in striking punches and chisels, as well as shaping and straightening unhardened metals. The standard, slim line, and sledge head one-piece types have a durable, hot-cast polyurethane coating which resists chipping or splitting, and is non-marring and non-sparking. The hot-cast polyurethane coating also reduces noise when striking metal.
FHP V-BELTS-BRW3L120>
1-1/2" X 1" GALVANIZED BUSHING
Bando Synchro-Link® P24L050 SH Type 3F Trapezoidal Flanged Timing Belt Pulley, QD® Bore, 2.835 in OD, 2.865 in Dia Pitch, 3/4 in W Face
Bando Synchro-Link® Timing Belt Pulleys are manufactured to exacting tolerances to assure total drive system compatibility. They are available in a complete range of sizes, types, configurations and materials to contribute to the efficiency, economy and performance of your drive.
