FHP BELTS 2L-3L-4L-5L
FHP V-BELTS-BRW4L170>
FHP V-BELT-JAS4L170>
FHP V-BELTS-BRW4L180>
FHP V-BELT 18."-JAS4L180 >
FHP V-BELTS-BRW4L190>
FHP V-BELT 19."-JAS4L190 >
FHP V-BELTS-BRW4L200>
FHP V-BELT-BRW4L210>
FHP V-BELTS-PIX4L210>
FHP V-BELTS-BRW4L220>
FHP V-BELT 22."-JAS4L220 >
FHP V-BELT 23."-JAS4L230 >
FHP V-BELTS-BRW4L240>
FHP V-BELT 26."-JAS4L260 >
FHP V-BELTS-BRW4L300>
FHP V-BELTS-BRW4L290>
Wrapped construction - Browning offers a full line of wrapped FHP Belts which provides smooth quiet operation. Wrapped FHP Belts are more tolerant to slipping and misalignment than Raw Edge Belts.
The best features of notched and wrapped belts. Designed for small sheave applications - Browning FHP Belts are formulated for maximum flexibility for use in small diameter sheaves.
FHP V-BELTS-BRW4L320>
FHP V-BELT 32."-JAS4L320 >
FHP V-BELTS-BRW4L330>
FHP V-BELT 34."-JAS4L340 >
Belt Type:
4L
Outside Length:
35"
Width (Inches):
1/2"
Pitch:
34
Max Operating Temp:
140°F
Color:
Black
Standards Met:
RMA
Material:
Rubber
FHP V-BELT 36."-JAS4L360 >
1/2" X 36" FHP V-BELT - PIX4L360>
Recently Viewed
15-WATT BAYO BASE 90C APPLIANCE BULB
540A Series Carriage C-Clamps are ideal for light industrial, woodworking and repair applications. They feature a black oxide coating, oscillating head, and sliding cross pin handle.
McGill® 0004200000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 2-5/8 in ID x 3.2487 in OD, 1.76 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
NSK Cylindrical Roller Bearings are available with a patented high strength cage design in pressed steel, machined brass or polyamide. Special materials are available for more arduous applications. Cylindrical bearings offer low noise and low heat generation and by virtue of the line contact between rolling elements and raceways, have high radial load capacity which are suited for high-speed applications.
Steel City® CWN-25 Gangable Switch Box, Steel, 14 cu-in Capacity, 1 Gangs, 1 Outlets, 4 Knockouts, 2 in W x 2-3/4 in D x 3 in H
Since 1904, Steel City® products have set the standard as the leading brand in electrical construction. In manufacturing quality and innovative design, Steel City® has no peer.
Drillco 350C003A 3500C Imperial Combined Drill and Countersink, 7/64 in Drill - Fraction, 0.1094 in Drill - Decimal Inch, 60 deg Included Angle, 60 deg Point Angle, Solid Carbide, Uncoated
Solid Carbide Combination Drill & Countersinks (Center Drills) have strong shanks and flutes, making them ideal in difficult materials. They may also be used in high production applications where tolerance, finish, and machine down-times are considered.
