TL-STYLE BUSHING
BROWNING 1008X5/8 5/8"-ID 1008-style Taper-lock Bushing
Mfr description
1008 X 5/8 TAPER BORE BUSHING
Mounts flush in products - No protruding flanges to interfere with the drive
Key to Key Drive - Cap screws act as an external key
1 1/2"/ft. Taper on Barrel - Since this is a non-self-locking taper it provides ease of installation and removal of products from the shaft.
7/8"-ID 1610-STYLE TL BUSHINGS IDC 1610-7/8
7/8"-ID 1610-STYLE TAPER-LOCK BUSHING
7/8"-ID 1210-STYLE TL BUSHINGS IDC 1210-7/8
7/8"-ID 1210-STYLE TAPER-LOCK BUSHING
7/8"-ID 1008-STYLE TL BUSHINGS IDC 1008-7/8
7/8"-ID 1008-STYLE TAPER-LOCK BUSHING
5/8"-ID 1210-STYLE TL BUSHINGS IDC 1210-5/8
5/8"-ID 1210-STYLE TAPER-LOCK BUSHING
95-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404095MM >
90-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404090MM >
85-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404085MM >
80-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404080MM >
75-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404075MM >
70-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404070MM >
65-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404065MM >
60-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404060MM >
55-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404055MM >
50-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404050MM>
48-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404048MM>
45-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404045MM>
42-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404042MM>
40-MM-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404040MM>
4"-ID 4040-STYLE TAPER-LOCK BUSHING - IDC40404 >
3-7/8"-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404037/8 >
3-7/16"-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404037/16 >
3-5/8"-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404035/8 >
3-5/16"-ID 4040-STYLE TAPER-LOCK BUSHING - IDC404035/16 >
Recently Viewed
TAPER BORE BUSHING 1-3/16" BORE-BRW1610X1.3/16 >
1-3/8" BUSHING WITH 3/8" KEYWAY-BRWP113/83/8 >
XTB-25-1.3/16 1-3/16"-ID Conveyor Pulley Bushing - Idcxtb251.
1-3/16"-ID CONVEYOR PULLEY BUSHING - IDCXTB251.3/16>
3-1/2" -ID QUICK DISCONNECT J-STYLE BUSHING
AGC-1 1-AMP GLASS AUTO FUSES--CARD OF 5-JWH581310 >
JASON 4430V790 VARIABLE SPEED BELT, V-BELT SECTION "V" OUTSIDE LENGTH 79" TOP WIDTH 2.75 "
CONFORMS TO RMA ENGINEERING STANDARD, TIME BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIMES NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH.
-JAS4430V790 >
