GY-1107-K-RR-B 1-7/16"-ID Sph/OD Insert
1-7/16"-ID SPH/OD INSERT BEARINGS-INAGY1107KRRB>
Recently Viewed
1-7/16"-ID SPH/OD INSERT BEARINGS-INAGY1107KRRB>
ALE10THHNORG 10-THHN ORANGE STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE10THHNORG >
FILTERS-WIX33583 >
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
Jacobs® 6295D 34-06 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 6JT Mounting, Plain Bearing, K3
Jacobs® 6295D 34-06 Fluted Heavy Duty Drill Chuck, 0.04 to 0.5 in Capacity, 6JT Mounting, Plain Bearing, K3
Browning® 1188242 Type 1 Shear Pin Hub, 3/8 to 1-1/2 in Dia Bore, 5-1/2 in OD Flange, 2-1/4 in L Through Bore
Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered. Torque capacity is up to 50720 in-lb.
