BALL BEARINGS
6003-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
6004-2-RS Double Sealed Bearing
6004-2RS SKF Brand Sealed Ball Bearings 20x42x12
6004-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60042RSNR >
6005-2-RS-JEM Double Shielded Bearing
Bore Diameter: 25 mm Outside Diameter: 47 mm Width: 12 mm Closure Type: Double-sealed (rubber contact seals on both sides) Cage Type: JE designation indicating a pressed steel or specialized light metal/brass-related configuration optimized for electric motor quality.
6005-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60052RSNR >
6006-2-RS Double Sealed Bearing
Bore Diameter (Inner ID): 30 mm Outside Diameter (OD): 55 mm Width: 13 mm Weight: Approximately 0.12 kg (0.28 lbs.)
Recently Viewed
The P6202 Fiberglass 2 ft Platform Ladder has a duty rating of 300 pounds and features a safety guard rail to encourage proper use. Back-up plates reinforce all top connectors and the large platform provides a secure and comfortable work area. The slip-resistant TRACTION-TRED® steps are double riveted and knee braced. A full set of rear horizontals are spaced one foot apart. The Edge® molded brace and foot pad combination provides bracing strength and increased protection from damage. Fiberglass rails are non-conductive for working near electricity.
8-MM-PITCH X 1064-MM TIMING BELT - JAS10648M20>
H-PITCHX63" TIMING BELT-JAS630H100 >
MORSE® 32488 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-12 Thread, H4 Thread Limit, Plug Chamfer, 6 Flutes, Bright, HSS
Browning 18-TOOTH P-BUSH #50 CHAIN SPROCKET BRW H-50-P-18
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
MORSE® 32653 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/4-10 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
