BALL BEARINGS
3212 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3212>
3215 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3215>
32212-01 1/2"-ID Flanged Ball Bearing
1/2"-ID FLANGED BALL BEARING - GEN3221201>
33-KDD-5 Miniature Series Radial Ball Bearing
MINIATURE SERIES RADIAL BALL BEARING - FAF33KDD5>
33-PP-5 Double Sealed Mini Ball Bearing
DOUBLE SEALED MINI BALL BEARING - FAF33PP5>
33006-01 Af-3236 Bearing .50" X 1.75" X .562"
AF-3236 BEARING .50" X 1.75" X .562" - GEN3300601>
3303-A Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3303A>
3306 Double Open Face Ball Bearing
The New Departure 3306 is a double-row, angular contact ball bearing, or a single-row deep groove ball bearing, often referenced in legacy automotive and industrial catalogs. The standard dimensions for this bearing are a 30 mm bore (inner) diameter, 72 mm outer diameter, and a 30.2 mm width
3306-ATN-9 Double Row Bearing
Bore Diameter (d): 30 mm Outside Diameter (D): 72 mm Overall Width (B): 30.2 mm Contact Angle: 30° to 32°Enclosure Type: Open (no integrated rubber seals or shields) Dynamic Radial Load Capacity (C): 41.5 kN Static Radial Load Capacity (C₀): 27.5 kN Limiting Speed: Up to 9,000 RPM Total Weight: Approximately 0.53 kg (1.18 lbs)
3308-DNRCBM Double Row Bearing
Bore (Inner) Diameter: 40 mm Outside Diameter: 90 mm Overall Width: 36.5 mm Contact Angle: 40°Limiting Speed: 7,000 RPM Basic Dynamic Load Rating: 49.4 kN Basic Static Load Rating: 41.5 kN
3310 Single Row Open Face Bearing
Bore Diameter: 50 mm Outside Diameter: 110 mm Width: 44 mm (or 27 mm depending on the specific single-row variation)
3310-A Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3310A>
Recently Viewed
7" PULLEY WITH 5/8" -ID-JWH337852 >
1-GAL HEAVY DUTY GLASS CLEANER-MISB00124GAL >
IKO BHA1010ZOH Inch Series Caged Heavy Duty Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 5/8 in Dia Bore, 7/8 in OD, 1 Row, 5/8 in W, 10200 N Dynamic/13800 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
STRAIGHT-ID SELF-ALIGN BALL BEARING-GUL1309 >
EASY-SPLICE B-BELTING (FT)-GATBVO/500 >
1" UNILET ALUMINUM COVER-ELEL1023 >
