BALL BEARINGS
6311-2-RS Double Sealed Radial Bearing
Inner Diameter (Bore): 55 mm Outer Diameter (OD): 120 mm Width (Thickness): 29 mm Dynamic Load Rating: 74.1 kN Static Load Rating: 45 kN Limiting Speed: 3,800 RPM Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F) Material: High-quality 52100 chrome steel with a pressed sheet steel cage
6311-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL63112RSNR >
6311-2-Z-NR Double Shielded Snap Ring Ball Bearing With Snap Ring
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63112ZNR >
6312-2-RS Double Sealed Radial Ball Bearing
DOUBLE SEALED RADIAL BALL BEARING-GUL63122RS >
6312-2-Z Double Shielded Ball Bearing
Bore Diameter (Inner): 60 mm Outside Diameter: 130 mm Width: 31 mm Weight: Approximately 1.70 – 1.75 kg Enclosure Type: Double metal shields (indicated by the 2Z suffix
6312-ZZ-NR Double Shielded Ball Bearing With Snap Ring
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL6312ZZNR >
6313 Double Open Face Bearing
Deep groove ball bearing
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
6313-2-RS Double Sealed Radial Ball Bearing
DOUBLE SEALED RADIAL BALL BEARING-GUL63132RS >
6313-2-Z-NR Double Shielded Ball Bearing With Snap Ring
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63132ZNR >
6313-M Ball Bearing With Bronze Retainer
BALL BEARING WITH BRONZE RETAINER-GUL6313M >
6314-2-RS Double Sealed Radial Ball Bearing
DOUBLE SEALED RADIAL BALL BEARING-GUL63142RS >
Recently Viewed
IDC Select® bushings are available in H, QD®, Taper-Lock®, and Split Taper™ designs and are available in inch and metric sizes. They are stocked in popular finished bore sizes. All IDC Select® bushings are fully interchangeable with industry standard design.
Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-20 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 1.11 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission PowerGrip® GT®2 P53-8MGT-30 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.26 in OD, 53 Grooves, 5.314 in Dia Pitch, 1.54 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
Gates® Power Transmission PowerGrip® GT®2 P56-8MGT-30 Synchronous Sprocket, 1/2 to 2-1/8 in Taper-Lock® Bore, 5.56 in OD, 56 Grooves, 5.614 in Dia Pitch, 1.48 in W Face
PowerGrip Sprockets and Pulleys provide optimum performance for all constructions of PowerGrip GT, PowerGrip HTD and PowerGrip Timing belts, delivering maximum performance and superior reliability. PowerGrip sprockets are precision manufactured and static balanced to eliminate sprocket wobble.
3-15/16" -ID 4-B PILLOW BLOCK UNIT-BRWSPB1000FN315/16 >
Morse® 131162 MHSTK Hole Saw, 1 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
