63/28-2-RS-NR 28-mm-ID Sealed Ball Bearing With Snap RIng
28-MM-ID SEALED BALL BEARING WITH SNAP RING-GUL63/282RSNR >
Recently Viewed
28-MM-ID SEALED BALL BEARING WITH SNAP RING-GUL63/282RSNR >
BRUSH RESEARCH GBD-33/4180-SC Heavy Duty Flexible Cylinder Hone, 3-3/4 in Dia Bore, 5 in L Abrasive, 13-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
Brady® WMS-111-321 BradySleeve™ 1-Sided Wire Marker Sleeve, 0.075 to 0.13 in Wire, 1 in L x 0.35 in W, Polyolefin
Brady® WMS-111-321 BradySleeve™ 1-Sided Wire Marker Sleeve, 0.075 to 0.13 in Wire, 1 in L x 0.35 in W, Polyolefin
BBI 710078 Shoulder Screw, Round Socket Head, 18-8 Stainless Steel, 1/2 in Dia x 2 in L Shoulder, 3/8-16
BBI 710078 Shoulder Screw, Round Socket Head, 18-8 Stainless Steel, 1/2 in Dia x 2 in L Shoulder, 3/8-16
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
6" X 3/8" TUCK POINTER USED TO CORRECT DEFECTS OR FINISH OF JOINTS IN NEWLY LAID MASONRY-JWH333222 >
