Dremel® 413 Sanding Disc, For Use With DREMEL® 3000 (3000-15), 3000 (3000-5), 3000 (3000-1/25 EZ), 3000 (3000-2/25), DREMEL Stylo+ (2050-15), 3000 (3000-2/45), 3000 (3000-10X), 4300 (4300-3/45EZ), DREMEL® Stylo+ (2050-10), Stylo+ (2050-15 JA)
Dremel® 413 Sanding Disc, For Use With DREMEL® 3000 (3000-15), 3000 (3000-5), 3000 (3000-1/25 EZ), 3000 (3000-2/25), DREMEL Stylo+ (2050-15), 3000 (3000-2/45), 3000 (3000-10X), 4300 (4300-3/45EZ), DREMEL® Stylo+ (2050-10), Stylo+ (2050-15 JA)
-
BrandDremel®
-
Manufacturer Part Number413
-
CountryUSA
-
MaterialSilicon Abraide
-
Specifications240 Grit, 3.2 mm Shank
-
Suitable For Use WithDREMEL® 3000 (3000-15), 3000 (3000-5), 3000 (3000-1/25 EZ), 3000 (3000-2/25), DREMEL Stylo+ (2050-15), 3000 (3000-2/45), 3000 (3000-10X), 4300 (4300-3/45EZ), DREMEL® Stylo+ (2050-10), Stylo+ (2050-15 JA)
Recently Viewed
Dremel® 413 Sanding Disc, For Use With DREMEL® 3000 (3000-15), 3000 (3000-5), 3000 (3000-1/25 EZ), 3000 (3000-2/25), DREMEL Stylo+ (2050-15), 3000 (3000-2/45), 3000 (3000-10X), 4300 (4300-3/45EZ), DREMEL® Stylo+ (2050-10), Stylo+ (2050-15 JA)
Dremel® 413 Sanding Disc, For Use With DREMEL® 3000 (3000-15), 3000 (3000-5), 3000 (3000-1/25 EZ), 3000 (3000-2/25), DREMEL Stylo+ (2050-15), 3000 (3000-2/45), 3000 (3000-10X), 4300 (4300-3/45EZ), DREMEL® Stylo+ (2050-10), Stylo+ (2050-15 JA)
40 TOOTH SPROCKETS FOR #80 CHAIN-BRW80A40 >
3/8" OFFSET SLIDING GLASS DOOR HANGER - JWH206237 >
MORSE® 25558 1751 Machine Countersink, 7/8 in Dia Body, 1/2 in Dia Shank, 4 Flutes, 82 deg Included, HSS
Milwaukee® 49-57-0812 Annular Cutter, 13/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 13/16 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 13/16 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
7/16" 12-PT 3/8" -DRIVE DEEP SOCKET-ARS11314 >

