metabo® 344492750 Cable, For Use With Model WPB 12-150 Quick DS
metabo® 655065000 Cord, For Use With Orbital Sander, Jig Saw And Angle Grinder
-
Brandmetabo®
-
Manufacturer Part Number344492750
-
CountryUSA
-
Dimensions9 in L
-
Suitable For Use WithModel WPB 12-150 Quick DS
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 43GZ45 |
Recently Viewed
metabo® 655065000 Cord, For Use With Orbital Sander, Jig Saw And Angle Grinder
Dichtomatik N70033 O-Ring, 033 Dash Number, 1.989 in ID x 2.129 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
WATTS® 0009821 LF263A 3-Way Small Pressure Regulator, 1/4 in Nominal, FNPT End Style, 300 psi Pressure, Brass Body
This 1/4 inch lead free small water pressure regulator is used in small general purpose applications to regulate water pressure in piping systems using water and No. 2 fuel oil. It has an oversized orifice and is ideally used on beverage dispensing and paint spraying equipment, ice cube machines, humidifiers, drinking fountains, and other small process applications. It consists of a lead free brass body with an adjusting tee handle, NPT threaded female connections, three-way low water pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, and a reinforced Buna-N diaphragm. The reduced water pressure range is 3 to 50 psi (0.2 to 3.4 bar) and is factory set at 15 psi (1.0 bar).
1/2" X 2-3/4" USS GR-5 Plow Bolts
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
Safety relief valves guard against over pressure conditions in compressors and other pressure vessels. These units are manufactured out of brass bar stock to ensure a non-porous, strong fitting. Seats are silicon rubber to provide a long leak free service life.
