Grinder Accessories
Porter-Cable® 54348 Center Wheel Retaining Nut, For Use With 87615 and 87616 Double Insulated Disc Sander/Grinder
Milwaukee® 49-05-0051 Round Base Flange Nut, For Use With 4-1/2 in and 5 in Sander/Grinders, 5/8-11 Arbor
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
SIDE HANDLE-MWK49150151>
SANDER DISC RETAINER NUTS-MWK49400380 >
7" X 5/8" -11 PHENOLIC BACKING PAD-MWK49366000 >
LAMBSWOOL COMPOUND PAD-MWK49361500 >
GRINDER RETAINING 5/8" -11 NUTS-MWK49400360 >
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
GRINDER BACK FLANGES-MWK49050125 >
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
FOAM POLISHING PAD-MWK49360650 >
CHAIN SPROCKET KIT-MWK14461175 >
AUXILIARY SIDE HANDLE-MWK49150200>
9" WHEEL GUARD KITS-MWK49120345 >
9" SANDER GUARDS-MWK49120110>
When converting Milwaukee® Sander Grinders to sanding operations a variety of sanding disc backing pad systems are available. The Rubber Backing Pad is more durable than the Phenolic and but is also heavier in weight. Where heavy production sanding will be encountered, this is a more viable option. When using the 9 in Rubber Backing Pad 49-36-3750 use disc nut 49-40-0360. Does not include sanding disc.
7" X 5/8" -11 RUBBER BACKING PAD-MWK49363700 >
7" X 5/8" -11 SANDER BACKING PAD-MWK49363800 >
Milwaukee® 48-80-6000 Phenolic Disc, For Use With 7 in Standard Angle Grinders, 5/8-11 Thread, 7000 rpm
7" SANDER GUARDS-MWK49120100>
This 7 in. Wheel guard kit will supply all the necessary hardware required to change the type 27 wheel guard on previous Milwaukee grinder models 6072, 6078, 6065-6, 6066-6, 6068-6, 6096, and 6098. A hand screwdriver is required to assemble this guard to the tool. Use hub adapter 48-03-1000, disc nut 49-40-0380 and nylon washer when using type 27 depressed center wheels (without hub).
5" X 5/8" -11 BACKING PAD KITS-MWK49363465 >
4" CUP WHEEL GUARD ASSEMBLYS-MWK49120062>
4-1/2" X 5/8" -11 BACKING PAD-MWK49363455 >
Recently Viewed
MORSE® 15164 1437 General Purpose Screw Machine Drill, #7 Drill - Wire, 0.201 in Drill - Decimal Inch, HSS, Bright
MORSE® 17164 2340 1-Stage Type J Heavy Duty Jobber Length Aircraft Drill, #7 Drill - Wire, 0.201 in Drill - Decimal Inch, 135 deg Point, Cobalt
7/16" -14" X 72 USS ZINC THREADED ROD-NBS9930440600 >
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
3-PC 3/8"-DR EXTENSION SETS - ALL11921 >
RIDGID® 38365 Bolt Threader Button Die, 5/8 in Conduit/Pipe, 5/8-11 UNC Thread, Right Thread, For Use With OO-RB Ratchet Bolt Threaders or 31B, 33B, 35B and 37B 3-Way Bolt Threaders, Alloy Steel
RIDGID® 38365 Bolt Threader Button Die, 5/8 in Conduit/Pipe, 5/8-11 UNC Thread, Right Thread, For Use With OO-RB Ratchet Bolt Threaders or 31B, 33B, 35B and 37B 3-Way Bolt Threaders, Alloy Steel
