Grinder Accessories
Porter-Cable® 54348 Center Wheel Retaining Nut, For Use With 87615 and 87616 Double Insulated Disc Sander/Grinder
SIDE HANDLE-MWK49150151>
SANDER DISC RETAINER NUTS-MWK49400380 >
7" X 5/8" -11 PHENOLIC BACKING PAD-MWK49366000 >
GRINDER RETAINING 5/8" -11 NUTS-MWK49400360 >
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
CHAIN SPROCKET KIT-MWK14461175 >
AUXILIARY SIDE HANDLE-MWK49150200>
9" SANDER GUARDS-MWK49120110>
When converting Milwaukee® Sander Grinders to sanding operations a variety of sanding disc backing pad systems are available. The Rubber Backing Pad is more durable than the Phenolic and but is also heavier in weight. Where heavy production sanding will be encountered, this is a more viable option. When using the 9 in Rubber Backing Pad 49-36-3750 use disc nut 49-40-0360. Does not include sanding disc.
7" X 5/8" -11 RUBBER BACKING PAD-MWK49363700 >
7" X 5/8" -11 SANDER BACKING PAD-MWK49363800 >
Milwaukee® 48-80-6000 Phenolic Disc, For Use With 7 in Standard Angle Grinders, 5/8-11 Thread, 7000 rpm
7" SANDER GUARDS-MWK49120100>
This 7 in. Wheel guard kit will supply all the necessary hardware required to change the type 27 wheel guard on previous Milwaukee grinder models 6072, 6078, 6065-6, 6066-6, 6068-6, 6096, and 6098. A hand screwdriver is required to assemble this guard to the tool. Use hub adapter 48-03-1000, disc nut 49-40-0380 and nylon washer when using type 27 depressed center wheels (without hub).
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
5" X 5/8" -11 BACKING PAD KITS-MWK49363465 >
Milwaukee 49-36-1500 is a 7-1/2" Lambswool Compound Ped designed for AUtomotive Buffing and Polishing
LAMBSWOOL COMPOUND PAD-MWK49361500 >
9" WHEEL GUARD KITS-MWK49120345 >
GRINDER BACK FLANGES-MWK49050125 >
4" CUP WHEEL GUARD ASSEMBLYS-MWK49120062>
4-1/2" X 5/8" -11 BACKING PAD-MWK49363455 >
Milwaukee® 49-12-0320 Angle Grinder Wheel Guard, For Use With Milwaukee 6140 and 6145 with Serial Number a Thru D Angle Grinder, 4-1/2 in Angle
Recently Viewed
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
7/16"-20 SAE GR-8 Hex Nuts
Browning® 1002393 TB Series Type 13 Web Multiple Sheave With Split Taper Bushing, 3/4 to 2-11/16 in Split Taper Bore, 8.28 in OD, 2 Grooves, 7.8 in (A)/8.3 in (B) Dia Pitch, 1-3/4 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
