Makita 4" 10000-RPM DISC GRINDERS MAK N-9501-BZ
4" 10000-RPM AC/DC DISC GRINDER-MAKN9501BZ
Recently Viewed
4" 10000-RPM AC/DC DISC GRINDER-MAKN9501BZ
SPECIALLY FORMULATED TO KILL FLIES, MOSQUITOES, WASPS, HORNETS, AND OTHER FLYING INSECTS. OUTDOOR FRESH SCENT.
-JWH756334 >
Charlotte PVC 02300 0600, 1/2 in nominal, Socket end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
Anvil® 0310016209 FIG 1103 Straight Street Elbow, 1/2 in Nominal, MNPT x FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
MasterDrive R1-1.11/16 R1 Series Double Split Tapered Bushing, 1.68 in Dia Bore, 4 in Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
