Black&Decker 120-VOLT 6" NON-LOCK ANGLE GRINDER BD- DW-E-43144-N
The DWE43144N 6 in high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection System™ technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off® advanced overload protection.
-
BrandDeWALT®
-
UPC885911471701
-
Manufacturer Part NumberDWE43144N
-
CountryUSA|Canada
-
Tool/KitKit
-
TypeHigh Performance
-
Handle TypeBarrel Grip
-
Voltage Rating120 V AC
-
Wheel Diameter6 in
-
Amperage Rating13 A
-
Arbor/Shank Size5/8-11
-
Horsepower2.3 hp
-
Dimensions13 in L
-
Speed9000 rpm
-
Switch TypePaddle
- Power loss Reset® prevents accidental restarts following a power disruption when the tool is left in the on position
- Dust Ejection System™ provides durability by ejecting damaging dust and debris particles that enter through the air intake vents
- Without lock on
- E-Clutch® overload protection, Dust Ejection System®, tool free flange system
- Anti-Rotation E-CLUTCHSystem activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 54DD27 |
| Grainger | 54DD27 |
| Grainger | 54DD27 |
-
UNSPSC27112704
-
Package DescriptionEACH
-
Warranty3 Years Limited
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
The DWE43144N 6 in high performance cut-off/grinder with E-Clutch® shuts the grinder off when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. Dust Ejection System™ technology clears dust and debris for extra protection. Power tool shuts off before overheating with Power-Off® advanced overload protection.
HCI Preferred Supplier 32319 Elbow, 1 in Nominal, Hose Barb x MIP End Style, CA377 Brass
HCI Preferred Supplier 32319 Elbow, 1 in Nominal, Hose Barb x MIP End Style, CA377 Brass
1-1/8"-ID COUPLING HUBS-LOV9S11/8>
ALFAGOMMA® B-0808-MNPS B Series One-Piece Hose Fitting, 1/2 in Hose, 1/2-14 Connection, Hose x Male End Style, 42.3 mm Cutoff Allowance, Import
ALFAGOMMA® B-0808-MNPS B Series One-Piece Hose Fitting, 1/2 in Hose, 1/2-14 Connection, Hose x Male End Style, 42.3 mm Cutoff Allowance, Import
Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.
2-OZ RUBYFLUID SOLDERING PASTE. THIS IS A GENERAL PURPOSE SOLDERING FLUXWHICH PROMOTES EFFECTIVE SOLDER JOINTS.-JWH333892 >
