DeWALT® DW2054 Compact Magnetic Drive Guide, 1/4 in Drive, HSS, 1/4 in Hex
DEWALT Magnetic Drive Guides has a self-retracting guide sleeve that protects fingers and holds screws in place while eliminating wobbling and slipping.
-
BrandDeWALT®
-
UPC028874020542
-
Manufacturer Part NumberDW2054
-
CountryUSA|Canada
-
MaterialHSS
-
TypeCompact Magnetic
-
Hex Size1/4 in
-
Shank Size1/4 in
-
Shank TypeHex
-
Drive Size1/4 in
-
Drive TypeHex
-
Overall Length6 in
- Self-retracting guide sleeve protects fingers and holds screws in place while eliminating wobbling and slipping
-
UNSPSC27111728
-
Package DescriptionEACH
Recently Viewed
DeWALT® DW2054 Compact Magnetic Drive Guide, 1/4 in Drive, HSS, 1/4 in Hex
DEWALT Magnetic Drive Guides has a self-retracting guide sleeve that protects fingers and holds screws in place while eliminating wobbling and slipping.
Hougen® Rotabroach® 12238 12000 Annular Cutter, 1-3/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Crosby® 1019533 Anchor Shackle, 6.5 ton Load, 7/8 in, 1.02 in Dia Bolt Pin, Hot Dipped Galvanized
Crosby® 1019533 Anchor Shackle, 6.5 ton Load, 7/8 in, 1.02 in Dia Bolt Pin, Hot Dipped Galvanized
Milwaukee® 49-57-1377 Tang Drive Annular Cutter, 1-3/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-3/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-1062 Annular Cutter, 1-1/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-1/16 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-1/16 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
Milwaukee® 49-57-1627 Tang Drive Annular Cutter, 1-5/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-5/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
