RIDGID® 64712 H-22 Penetrating Nozzle, For Use With: Model KJ-1350/KJ-1750 1-1/4 to 4 in Water Jetter, 1/8 in FNPT
RIDGID® 64712 H-22 Penetrating Nozzle, For Use With: Model KJ-1350/KJ-1750 1-1/4 to 4 in Water Jetter, 1/8 in FNPT
-
BrandRIDGID®
-
UPC095691647122
-
Manufacturer Part Number64712
-
CountryUSA
-
Specifications1/8 in FNPT
-
Suitable For Use WithModel KJ-1350/KJ-1750 1-1/4 to 4 in Water Jetter
-
Alternative Part NumberH-22
-
UNSPSC99999999
-
Package DescriptionEACH
-
WarrantyLifetime
-
Catalog
-
Warranty Information
Recently Viewed
RIDGID® 64712 H-22 Penetrating Nozzle, For Use With: Model KJ-1350/KJ-1750 1-1/4 to 4 in Water Jetter, 1/8 in FNPT
RIDGID® 64712 H-22 Penetrating Nozzle, For Use With: Model KJ-1350/KJ-1750 1-1/4 to 4 in Water Jetter, 1/8 in FNPT
HOT-DIPPED STEEL CONSTRUCTION IS DIPPED IN A BATH OF MOLTEN ZINC TO COAT AND SEAL. REINFORCED WIRE RIM. WEATHER AND RUST RESISTANT. SUITABLE FOR DRY OR LIQUID STORAGE.
-JWH624417 >
Loctite® Chisel® 135544 SF 790™ Paint Stripper, 18 oz Aerosol Can, Liquid Form, Gray to Off-White, Sharp Solvent Odor/Scent
LOCTITE® SF 790™ paint Stripper removes gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Works on wood; non-corrosive on aluminum. Not for use on plastics, linoleum, or synthetic fibers
5/16" DIAMETERX1-3/4" SOCKET HEAD CAP SCREWS-HOL72134 >
WATTS® 0009478 LFN45B Lead Free Pressure Reducing Valve, 3/4 in Nominal, FNPT End Style, 25 to 75 psi Pressure, Cast Copper Silicon Alloy Body
This 3/4 inch lead free water pressure reducing valve is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a lead free cast copper silicon alloy body construction, NPT threaded union inlet and NPT female outlet connection, stainless steel integral strainer, thermoplastic seat module, thermal expansion bypass and a sealed spring cage for waterworks pit installations. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). Suitable for up to 400 psi (27.6 bar), the pressure range can be adjusted from 25 to 75 psi (172 to 517 kPa) with the standard setting at 50 psi (345 kPa).
O.D. X I.D.(MM)--8.0 X 5.0
WALL THICKNESS--1.5-MM
WP AT 75-DEGREES-F--155-PSI
TUBE LENGTH--100'
COLOR--TRANSPARENT BLUE
