Jet Tools 3/8" PNEUMATIC GEARWRENCHES JET JSM-30
JET® JSM-30 Angle Driver Heavy Duty Ratchet Wrench, 3/8 in Drive, 50 ft-lb Torque, 150 rpm Speed, 4 cfm Air Flow, 90 psi
-
BrandJET®
-
UPC662755109805
-
Manufacturer Part NumberJSM-30
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating50 ft-lb
-
Minimum Hose Size3/8 in
-
TypeAngle Driver Heavy Duty
-
Air Flow Rate4 cfm
-
Air Inlet1/4 in
-
Air Pressure90 psi
-
SeriesJSM
-
Housing MaterialSteel
-
Dimensions10 in L
-
Speed150 rpm
-
Drive Size3/8 in
-
Bolt Capacity3/8 in
-
UNSPSC27111753
-
Warranty1 Year
Recently Viewed
JET® JSM-30 Angle Driver Heavy Duty Ratchet Wrench, 3/8 in Drive, 50 ft-lb Torque, 150 rpm Speed, 4 cfm Air Flow, 90 psi
Browning® 1077486 QD Bushing, 2-3/4 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
5-GAL LIQUID DISH MACHINE DETERGENT-ML-MW32305GAL>
3/4" FEMALE ADAPTER; TO ATTACH PVC CONDUIT TO THREADED FITTING-JWH507838 >
Jacobs® 30605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
Jacobs® 30605 L-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: KGA, For Use With 1/4 in and 3/8 in Multi-Craft® Chucks, Soft Steel
Thomson® S2000 Double-Acting External Standard Linear Shaft Seal, 2 in ID x 3.004 in OD, 3/8 in W, Steel
