Jet Tools 3/4" PNEUMATIC/AIR IMPACT WRENCHES JET JSG-0750
JET® JSG-0750 Pro Duty Impact Wrench, 3/4 in Drive, 140 to 560 ft-lb Torque, 10 cfm Air Flow, 8 in OAL
-
BrandJET®
-
UPC662755109591
-
Manufacturer Part NumberJSG-0750
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating140 to 560 ft-lb
-
Minimum Hose Size3/8 in
-
Air Flow Rate10 cfm
-
Air Inlet1/4 in
-
Air Pressure90 psi
-
SeriesPro Duty
-
Housing MaterialAluminum
-
Dimensions4.2 in H x 10.1 in W
-
Sound Level105 dB
-
Speed4500 rpm
-
Drive Size3/4 in
-
Drive TypeSquare
-
Overall Length8 in
-
UNSPSC27131501
Recently Viewed
JET® JSG-0750 Pro Duty Impact Wrench, 3/4 in Drive, 140 to 560 ft-lb Torque, 10 cfm Air Flow, 8 in OAL
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
WA30 Dodge® 228087 Taper-Lock Type W/WA Weld-On Hub, 4-1/4 in Bore, 5-1/2 in OD, 4 in Bolt Circle Diameter, 3 in OAL, Steel
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taper bored to receive the taper-lock bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs are available from stock.
Bostitch® PT-10D120FH25 PT Series 33 deg Paper Collated Framing Nail, 3 in L, 0.12 in Dia, 11 ga, Coated, Carbon Steel Alloy
Bostitch® PT-10D120FH25 PT Series 33 deg Paper Collated Framing Nail, 3 in L, 0.12 in Dia, 11 ga, Coated, Carbon Steel Alloy
JAS1926V390>
Milton Closed Ball Air Chuck with Safety Clip-on Grip, 1/4" FNPT, Tire Pressure Gauge, Air Hose Quick Connect Adapter
1/4 in FNPT single head air Chuck with grip Chuck locks onto valve core thread. Sealing type Chuck is closed or sealing and is for use on an airline. Not for use with an inflator gauge. Milton® air Chucks are designed and manufactured to exacting standards. Maximum pressure of 150 psi. These are not for use with an inflator/pressure gauge.
