Ingersoll-Rand 231HA-2 231 General Duty Air Impact Wrench, 1/2 in Drive, 25 to 350 ft-lb Torque, 4.2 to 22 cfm Air Flow, 9 in OAL
The 231HA Series is the ideal impact wrench for any job you take it to, from facility maintenance and industrial work to vehicle repair and tire work. Tough and durable with a powerful vane motor, this impact wrench won’t let you down.
-
BrandIngersoll Rand
-
Manufacturer Part Number231HA-2
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating25 to 350 ft-lb
-
Minimum Hose Size3/8 in
-
TypeGeneral Duty
-
Handle TypePistol Grip
-
Air Flow Rate4.2 to 22 cfm
-
Air Inlet1/4 in NPTF
-
Air Pressure90 psi
-
Series231
-
Sound Level94/105 dBA
-
Speed8000 rpm
-
Blows per Minute1150 bpm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Overall Length9 in
- Durability, This impact wrench is tough enough to handle harsh environments, repeated drops and run-ins with any number of chemicals
- Access, Pressure-fed lubrication system
- Handle exhaust directs air away from user
- Power Regulation, Adjustable power regulation in forward and reverse
- Extended Reach, The 2 in extended anvil provides you with increased reach that's invaluable when working with deeper fasteners
- Easy to Service, Easy to service two-piece construction
- Comfort, Contoured handle for comfort and control
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6Z917 |
| Ferguson | I231HA2 |
| Fastenal | 0210626 |
-
UNSPSC27131501
-
Catalog
-
Instruction/Installation Manual
-
Owners/User Manual
-
Full Engineering Drawing
-
Line Drawing
Recently Viewed
Ingersoll-Rand 231HA-2 231 General Duty Air Impact Wrench, 1/2 in Drive, 25 to 350 ft-lb Torque, 4.2 to 22 cfm Air Flow, 9 in OAL
The 231HA Series is the ideal impact wrench for any job you take it to, from facility maintenance and industrial work to vehicle repair and tire work. Tough and durable with a powerful vane motor, this impact wrench won’t let you down.
Crescent® C10SVN-08 Locking Pliers, 1.875 in Nominal, 1.25 L x 2.15 W x 0.56 T in Jaw Alloy Steel Jaw Long Nose Jaw, 10 in OAL, ASME
Crescent locking pliers are made to an exacting standards that result in improved durability and long-term performance. They meet stringent ASME B107.24 and B107.36 standards, as applicable, including standards for strength and maximum jaw capacity. All Crescent locking pliers have a cushion grip trigger release for easier opening and large hex key recess for additional leverage when tightening. The head and body also have a narrow profile necessary for work in tight and confined spaces.
Proto® JSCV36T Reversible Spline Combination Wrench, 1-1/8 in, 12 Points, 15 deg Offset, 15-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Proto® JSCV36T Reversible Spline Combination Wrench, 1-1/8 in, 12 Points, 15 deg Offset, 15-7/8 in OAL, Forged Steel, Full Polished, ASME Specified
Klein® Tape Stop™ 918-7.5ME-RE Magnetic Measuring Tape, 25 ft L x 1 in W Blade, Steel, Imperial, 1/16 in
Klein® Tape Stop™ 918-7.5ME-RE Magnetic Measuring Tape, 25 ft L x 1 in W Blade, Steel, Imperial, 1/16 in
Eklind® 10914 Long Key Set With Pouch, 14 Pieces, T6 to T55 Torx, L-Handle Handle, Alloy Steel, Black Oxide
Eklind® 10914 Long Key Set With Pouch, 14 Pieces, T6 to T55 Torx, L-Handle Handle, Alloy Steel, Black Oxide
Catamount® 10400C Cable Tie, 5.59 in L x 0.1 in W x 0.044 in THK, Nylon 6.6/Polyamide
Gardner Bender cable ties are designed for strength, durability and reliability. Ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen, you name it and these ties will bundle it. Designed with simple enhancements that make them easy to use including a slightly bent tip to ensure easy insertion into the tie head and close serrations along it's length to promote precise adjustment when tightening. Gentle on the hands with smooth radiused edges that ensure "slip" through the head and finger grips on the end to provide a secure and comfortable grip when tightening. Made from durable 100% nylon 6/6 material these ties are UL recognized with a serviceable temperature range from 0 deg C to 85 deg C (32 deg F to 185 deg F). If you want a high quality product that will fulfill all your application needs, then choose Gardner Bender cable ties.
