Ingersoll-Rand 1/2"-DR PIN-TYPE AIR IMPACT WRENCH ING 2135-PTI-MAX
Ingersoll-Rand 2135PTIMAX Industrial Duty Standard Anvil Air Impact Wrench, 1/2 in Drive, 50 to 550 ft-lb Torque, 24 cfm Full Load/5 cfm Average Air Flow, 7-1/3 in OAL
-
BrandIngersoll Rand
-
UPC663023037226
-
Manufacturer Part Number2135PTIMAX
-
CountryUSA
-
Tool/KitBare Tool
-
Torque Rating50 to 550 ft-lb
-
Minimum Hose Size3/8 in
-
TypeIndustrial Duty Standard Anvil
-
Handle TypePistol Grip
-
Air Flow Rate24 cfm Full Load/5 cfm Average
-
Air Inlet1/4 in NPT
-
Air Pressure90 psi
-
Series2135
-
Housing MaterialTitanium
-
Sound Level99.8 dBA Impact/109.2 dBA Free Speed
-
Speed9800 rpm
-
Blows per Minute1250 bpm
-
Drive Size1/2 in
-
Drive TypePin/Square
-
Overall Length7-1/3 in
- Power, This wrench's high torque output and power regulator allow easy control over your tool
- Durability, With a composite housing and a hammer case made of titanium, this wrench can endure repeated drops and harsh environments
- Reliability, With twin hammer mechanism and powerful motor, the 2135PTiMAX is built not only for performance, but to last
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 1UMK7 |
| Fastenal | 0247778 |
| Ferguson | I2135PTIMAX |
-
UNSPSC27131501
-
Instruction/Installation Manual
-
Owners/User Manual
-
Line Drawing
Recently Viewed
Ingersoll-Rand 1/2"-DR PIN-TYPE AIR IMPACT WRENCH ING 2135-PTI-MAX
Ingersoll-Rand 2135PTIMAX Industrial Duty Standard Anvil Air Impact Wrench, 1/2 in Drive, 50 to 550 ft-lb Torque, 24 cfm Full Load/5 cfm Average Air Flow, 7-1/3 in OAL
1/2" X 15" J CONCRETE ANCHOR BOLT-NBS9290501500 >
277-VOLT 2-BULB F-96 HO BALLASTS-UNV487XLHTCP >
BBI 241376 Dowel Pin, 5/8 in Dia x 2 in L, Alloy Steel, Plain
8.5" ELECTRICIAN'S STRIPPER, CUTTER, & CRIMPER PLIER-ARS67905 >
Browning® 1223585 Minimum Plain Bore Type C1 Change Gear, 12 Diametral Pitch, 14.5 deg Pressure Angle, 3/4 in W Face, 45 Teeth, 3-3/4 in Dia Pitch, 1 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
