Klein® 32799 Pro Impact Power Bit Set, #1, #2, #3, 3/16 in, 1/4 in Phillips®/Slotted/Square Point, 5-1/2 in OAL, 1/4 in, 5/16 in, 3/8 in, S2 Steel
Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.
-
BrandKlein®
-
UPC092644327995
-
Manufacturer Part Number32799
-
CountryUSA|Canada
-
Point Size#1, #2, #3, 3/16 in, 1/4 in
-
Point TypePhillips®/Slotted/Square
-
MaterialS2 Steel
-
SeriesPro Impact
-
Shank TypeHex
-
Drive/Shank Size1/4 in, 5/16 in, 3/8 in
-
Overall Length5-1/2 in
- Extended 4 in Phillips and Square bits for hard-to-reach fasteners
- Bits are easy to find and fit securely in the storage case
- Case has a spring loaded stay-shut latch and a hidden storage area for loose bits
- Slotted tips and nut drivers use ASME standard color coding
- 4 in bit extension with strong magnet to keep bits in place
- 1-1/4 in precision machined bits are longer and easier to grip
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 197GR7 |
-
Alternative Part Number14775366
-
UNSPSC27112814
-
IDEA Index ID14775366
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: Cancer and reproductive harm - See www.P65Warnings.ca.gov for more information
-
Specification Sheet
Recently Viewed
Klein® 32799 Pro Impact Power Bit Set, #1, #2, #3, 3/16 in, 1/4 in Phillips®/Slotted/Square Point, 5-1/2 in OAL, 1/4 in, 5/16 in, 3/8 in, S2 Steel
Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
612553 DO-IT-BEST/VELCRO BRAND 3/4" X 15' BLACK STICKY BACK RECLOSABLE HOOK AND LOOP ROLL
ADHESIVE BACKING. GENERAL PURPOSE, RECLOSABLE
-JWH612553 >
Channellock® 368 Lineman's Plier, 1.41 in L x 1.12 in W x 0.55 in THK C1080 High Carbon Steel Jaw, Crosshatch Pattern Jaw Surface, 8.38 in OAL
Channellock® linemen's pliers feature Xtreme leverage technology (XLT) for considerably less force required to cut than traditional high leverage designs. Crosshatch jaws provide maximum grip, precision machined knife and anvil style cutting edges ensure perfect mating and are laser heat treated for superior cutting edge life. Pliers are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
#10 X 3/4" Bonded Hex Tek-3 Screws
1/8 -MALE PIPE THREADX6 BLACK NIPPLE
