Milwaukee® 2854-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 3/8 in, 250 ft-lb Torque, 18 V, 4.8 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
-
BrandMilwaukee®
-
UPC045242568819
-
Manufacturer Part Number2854-20
-
CountryUSA|Canada
-
Torque Rating250 ft-lb
-
TypeCordless Variable
-
Voltage Rating18 V
-
Control TypeForward/Reverse Rocker Switch
-
SeriesM18™ FUEL™
-
Housing MaterialAluminum
-
Bare Tool/KitBare Tool
-
Battery IncludedNo
-
Battery TypeLithium-Ion
-
Speed2400 rpm
-
Drive Size3/8 in
-
Overall Length4.8 in
- 4.8 in in length provides most access in tight spaces
- The POWERSTATE brushless motor delivers up to 250 ft lbs of nut-busting torque
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft lbs of torque
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
- REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to to 69kV environments
- Compatible with all M18 Batteries and Chargers
- 4.8 in length provides most access in tight spaces
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 60YT13 |
| Fastenal | 922458228 |
-
Alternative Part Number17585555
-
UNSPSC27112713
-
IDEA Index ID17585555
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 Year Limited Warranty
-
Service Manual
-
Line Drawing
Recently Viewed
Milwaukee® 2854-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 3/8 in, 250 ft-lb Torque, 18 V, 4.8 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
Milwaukee® M18™ 2668-20 Cordless Impact Wrench With Friction Ring, 3/8 in Square Drive, 2400/3400 bpm, 30 ft-lb Mode 1, 60 ft-lb Mode 2 Torque, 18 V DC, 12-1/8 in OAL
The M18™ cordless 2-speed 3/8 in. right angle impact wrench offers users maximum access, and ultimate speed & control over their hard to reach fastening applications. Its 1.7 in. head profile fits where pistol-grip impact tools cannot, and its extended paddle switch allows upgrade to operate their tool from multiple grip points. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-mode DRIVE CONTROL™. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 2-speed 3/8 in. right angle impact wrench features an LED light to illuminate work surfaces.
Milwaukee® 2562-21 M12 FUEL™ Stubby Impact Wrench Kit, 3/8 in Drive, 3300 bpm, 6600 in-lb Torque Rating, 12 V, 4.8 in OAL
The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.
Milwaukee® 0779-22 Heavy Duty Cordless Impact Wrench Kit, 1/2 in Square Drive, 0 to 2450 bpm, 325 ft-lb Torque, 28 VDC, 12-1/8 in OAL
Handle the toughest jobs with maximum power, speed and runtime. The M28™ cordless Lithium-Ion 1/2 in impact wrench combines 325 ft-lb of torque with 1450 rpm and 2450 bpm to complete heavy duty applications. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides upto 2X more runtime than 18 V batteries. The magnesium gear case offers extreme jobsite durability and lighter weight. The M28™ 1/2 in impact wrench features non-slip, soft-grip surfaces that reduce vibration for comfort and less fatigue during prolonged use. The forward/reverse shuttle is helpfully located above the variable-speed switch for fast, easy access, while the detent kit ensures quick changes as well as superior socket retention. A hanger bracket and heavy duty steel ring are included for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.
Milwaukee® M18 FUEL™ 2865-20 Hex Utility High Torque Cordless Impact Wrench With One-Key™ Technology, 7/16 in Hex Drive, 750 ft-lb Torque, 18 V DC
The MILWAUKEE® M18 FUEL™ 7/16” Hex Utility High Torque Impact Wrench w/ ONE-KEY™ delivers the Fastest Drilling Speed, More Power, and is Built for Maximum Control. The POWERSTATE™ Brushless Motor and all-new mechanism provide linemen with 30% faster drilling speeds, increasing their productivity. With up to 750ft-lbs max torque, this battery powered impact wrench effortlessly removes rusted or corroded hardware. It is ergonomically designed for the lineman, providing superior control whether in-bucket, on-ground or climbing. The extended handle provides increased grip surface, perfectly fitting high voltage safety gloves for improved comfort, less fatigue, and balanced maneuverability. This is the first 7/16” high torque impact gun to be equipped with a QUIK-LOK™ chuck, providing faster and easier bit changes. One hand can firmly grip the tool’s handle while inserting augers, sockets and other essential power utility accessories. The integrated lanyard loop allows for easy transfer and storage the tool. REDLINK PLUS™ Intelligence ensures maximum performance and protects the impact from overloads, heating, and over-discharge. The REDLITHIUM™ Battery Pack (not included) is compatible with 175+ M18™ tools, delivering more work per charge and more work over the life of the pack. ONE-KEY™ also gives the ability to Customize, Track and Manage the utility impact. ONE-KEY™ technology can save up to 4 task settings directly to the tool. If the tool is ever lost or stolen, its tracking functionality can lock it out.
Milwaukee® M18™ 2852-20 Mid Torque Cordless Impact Wrench With Friction Ring, 3/8 in, 600 ft-lb Torque, 18 VDC, 6.7 in OAL
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ 3/8 in mid-torque impact wrench is the most powerful 3/8 in impact wrench in the industry. The POWERSTATE™ brushless motor delivers upto 0 to 2300 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries, the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in L and 5.3 lb with a 5 Ah battery, the M18™ FUEL™ 3/8 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool offers quick, tool-free socket changes with a 3/8 in friction ring anvil. The anvil provides the most durable solution allowing users to work longer than any cordless competitor in its class. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
