Milwaukee® 2855-22 M18™ FUEL™ Cordless Variable Compact Impact Wrench, 1/2 in, 250 in-lb Torque, 18 V, 4.9 in OAL
The Milwaukee® M18™ FUEL™ 1/2 in compact impact wrench w/friction ring kit is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lb of nut-busting torque and maximum workspace visibility. This battery-powered impact wrench measures only 4.9 in L with a POWERSTATE™ brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee® 1/2 in impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-mode DRIVE CONTROL™ offers greater precision with a range of pre-set rpm and IPM levels, selectable from a single button on the tool. By selecting mode-4, AUTO SHUT-OFF™ control applies no more than 20 ft-lb of torque for hand-tight fastening applications to prevent overtightening. Mode-4 also features bolt removal control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ cordless tools, delivering more work per charge and more work over the life of the pack. This kit includes (1) M18™ FUEL™ 1/2 in compact impact wrench w/friction ring, (2) M18™ 5 Ah batteries, (1) M12™/M18™ charger and a carrying case.
-
BrandMilwaukee®
-
UPC045242601455
-
Manufacturer Part Number2855-22
-
CountryUSA|Canada
-
Torque Rating250 in-lb
-
TypeCordless Variable
-
Voltage Rating18 V
-
SeriesM18™ FUEL™
-
Housing MaterialAluminum
-
Bare Tool/KitKit
-
Battery Capacity5 Ah
-
Battery IncludedYes
-
Battery TypeLithium-Ion
-
Speed2400 rpm
-
Drive Size1/2 in
-
Overall Length4.9 in
- 4.9 in L provides most access in tight spaces
- The POWERSTATE™ brushless motor delivers up to 250 ft-lb of nut-busting torque
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-mode DRIVE CONTROL™ provides greater control over output speed and power, includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 ft-lb of torque
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
- Mode-1 rpm - 0 to 900, mode-2 rpm - 0 to 1650, mode-3 rpm - 0 to 2400, mode-4 rpm - 0 to 2400
- Mode-1 ipm - 0 to 1000, mode-2 ipm - 0 to 2400, mode-3 ipm - 0 to 3500, mode-4 ipm - 0 to 3500
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to 69 kV environments
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 60YT17 |
| Grainger | 60YT17 |
| Grainger | 60YT17 |
-
UNSPSC27112713
-
Includes(2) Battery, Case, Charger and Friction Ring Kit
-
Package Description1/PK
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years for Tool, 3 years for Battery
Recently Viewed
Milwaukee® 2855-22 M18™ FUEL™ Cordless Variable Compact Impact Wrench, 1/2 in, 250 in-lb Torque, 18 V, 4.9 in OAL
The Milwaukee® M18™ FUEL™ 1/2 in compact impact wrench w/friction ring kit is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lb of nut-busting torque and maximum workspace visibility. This battery-powered impact wrench measures only 4.9 in L with a POWERSTATE™ brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee® 1/2 in impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-mode DRIVE CONTROL™ offers greater precision with a range of pre-set rpm and IPM levels, selectable from a single button on the tool. By selecting mode-4, AUTO SHUT-OFF™ control applies no more than 20 ft-lb of torque for hand-tight fastening applications to prevent overtightening. Mode-4 also features bolt removal control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ cordless tools, delivering more work per charge and more work over the life of the pack. This kit includes (1) M18™ FUEL™ 1/2 in compact impact wrench w/friction ring, (2) M18™ 5 Ah batteries, (1) M12™/M18™ charger and a carrying case.
Milwaukee® 2562-20 M12 FUEL™ Stubby Impact Wrench, 3/8 in Drive, 550 ft-lb Torque Rating, 4.8 in OAL
The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. Leveraging POWERSTATE™ Brushless Motor, The Stubby Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This Milwaukee® solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.
Milwaukee® 0779-20 Heavy Duty Cordless Impact Wrench, 1/2 in Square Drive, 0 to 2450 bpm, 325 ft-lb Torque, 28 VDC, 12-1/8 in OAL
The Milwaukee 0779 28 Volt 1/2 in. impact wrench delivers 325 ft. lbs of maximum torque. Powering the 0779 is the revolutionary 28 Volt lithium-ion battery pack exclusively from Milwaukee. Combining high torque with 1,450 RPM and 2,450 ipm, the 0779 provides the power, speed and run-time to drive larger lags, drill bigger holes, and remove larger nuts. The powerful Milwaukee 28 V motor makes breaking loose stuck nuts a breeze. The heavy-duty magnesium mechanism housing provides extreme job-site durability. The 0779 comes equipped with comfortable non-slip, soft-grip surfaces that reduce vibration and fatigue. The forward/reverse shuttle is conveniently located above the variable speed switch for fast, easy access. Designed for heavy-duty use, whether driving large lag screws, anchors and bolts, drilling large holes, or removing lug nuts, the 0779 provides the power, comfort and run-time to finish the job. A heavy-duty steel ring (included) can be attached for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.
Milwaukee® 2854-22 M18™ FUEL™ Cordless Variable Compact Impact Wrench, 3/8 in, 250 in-lb Torque, 18 V, 4.8 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring Kit is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The included M18™ REDLITHIUM™ 5.0Ah battery pack fits M18™ tools, delivering more work per charge and more work over the life of the pack. This kit includes (1) M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring, (2) M18™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Carrying Case
