Milwaukee® M18™ 2668-22 Cordless Impact Wrench Kit With Friction Ring, 3/8 in Square Drive, 2400/3400 bpm, 30 ft-lb Mode 1, 60 ft-lb Mode 2 Torque, 18 VDC, 14-1/4 in OAL

Cordless Impact Wrenches

$432.12

The M18™ cordless 2-speed 3/8 in right angle impact wrench offers users maximum access and ultimate speed and control over their hard to reach fastening applications. Its 1.7 in head profile fits where pistol-grip impact tools cannot and its extended paddle switch allows trademen to operate their tool from multiple grip points. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-mode DRIVE CONTROL™. REDLINK™ intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 2-speed 3/8 in right angle impact wrench features an LED light to illuminate work surfaces.

DeWALT® XRP™ DW059K-2 Cordless Impact Wrench Kit With Detent Pin Anvil, 1/2 in Square Drive, 2700 bpm, 300 ft-lb Torque, 18 VDC, 10-3/4 in OAL

Cordless Impact Wrenches

$528.31

The DW059K-2 1/2 in 18 V cordless XRP™ impact wrench kit performs a wide range of heavy duty fastening applications with 300 ft-lb of maximum torque. Features a comfort grip for maximum comfort and a durable magnesium gear case and all metal transmission for extended durability

Milwaukee® 2854-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 3/8 in, 250 ft-lb Torque, 18 V, 4.8 in OAL

Cordless Impact Wrenches

$286.92

The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.

Milwaukee® M18™ 2668-20 Cordless Impact Wrench With Friction Ring, 3/8 in Square Drive, 2400/3400 bpm, 30 ft-lb Mode 1, 60 ft-lb Mode 2 Torque, 18 V DC, 12-1/8 in OAL

Cordless Impact Wrenches

$263.82

The M18™ cordless 2-speed 3/8 in. right angle impact wrench offers users maximum access, and ultimate speed & control over their hard to reach fastening applications. Its 1.7 in. head profile fits where pistol-grip impact tools cannot, and its extended paddle switch allows upgrade to operate their tool from multiple grip points. This is the only tool in its class to offer multiple speed/torque modes through proprietary 2-mode DRIVE CONTROL™. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 2-speed 3/8 in. right angle impact wrench features an LED light to illuminate work surfaces.

Milwaukee® 2562-21 M12 FUEL™ Stubby Impact Wrench Kit, 3/8 in Drive, 3300 bpm, 6600 in-lb Torque Rating, 12 V, 4.8 in OAL

Cordless Impact Wrenches

$392.52

The new MILWAUKEE® 3/8” Stubby Impact Wrench delivers the Most Power, Is Lighter Weight & More Compact while delivering 50% Faster Application speeds. The POWERSTATE™ Brushless Motor Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This solution delivers on performance and size, at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly. Kitted with the M12™ REDLITHIUM™ HIGH OUTPUT™ XC5.0 Battery Pack that delivers 25% more power, runs 25% cooler, and is chemical resistant to protect against exposure to common oils, greases, and solvents.

IDW_IMAGE_5906f1602028e641782a6d8e8b1406097c809dc70a6f26660e45bbb6776c3f2e

Milwaukee® 0779-22 Heavy Duty Cordless Impact Wrench Kit, 1/2 in Square Drive, 0 to 2450 bpm, 325 ft-lb Torque, 28 VDC, 12-1/8 in OAL

Cordless Impact Wrenches

$631.77

Handle the toughest jobs with maximum power, speed and runtime. The M28™ cordless Lithium-Ion 1/2 in impact wrench combines 325 ft-lb of torque with 1450 rpm and 2450 bpm to complete heavy duty applications. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides upto 2X more runtime than 18 V batteries. The magnesium gear case offers extreme jobsite durability and lighter weight. The M28™ 1/2 in impact wrench features non-slip, soft-grip surfaces that reduce vibration for comfort and less fatigue during prolonged use. The forward/reverse shuttle is helpfully located above the variable-speed switch for fast, easy access, while the detent kit ensures quick changes as well as superior socket retention. A hanger bracket and heavy duty steel ring are included for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.

My Wishlist

Compare

Milwaukee® M18™ 2668-22 Cordless Impact Wrench Kit With Friction Ring, 3/8 in Square Drive, 2400/3400 bpm, 30 ft-lb Mode 1, 60 ft-lb Mode 2 Torque, 18 VDC, 14-1/4 in OAL

Recently Viewed