Black&Decker IMPACT KIT--USE "BD-" DC-F-921-P-2
DeWALT® 20V MAX* MATRIX™ DCF880HM2 Compact Lightweight Cordless Impact Wrench Kit With Hog Ring Anvil, 1/2 in Square Drive, 1800 in-lb Torque, 20 VDC, 5-3/4 in OAL
-
BrandDeWALT®
-
UPC885911312134
-
Manufacturer Part NumberDCF880HM2
-
CountryUSA
-
Torque Rating1800 in-lb
-
TypeCompact Lightweight
-
Handle TypeTextured Anti-Slip/Comfort/Pistol Grip
-
Voltage Rating20 V DC
-
Control TypeVariable Speed/Forward/Reverse Rocker Switch
-
Housing MaterialPlastic
-
Bare Tool/KitKit
-
Battery Capacity4 Ah
-
Battery IncludedYes
-
Battery TypeLithium-Ion
-
Speed0 to 2300 rpm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Overall Length5-3/4 in
- Compact and lightweight design fits into tight areas
- (3) LED lights with 20 sec delay after trigger release, provide visibility without shadows
- Hog ring anvil to easily change sockets
- Textured anti-slip comfort grip provides maximum comfort and control
- Battery fuel gauge indicator with 3 LED lights provides end users with guidance about the level of battery run time available in the pack
- Primarily for use with impact sockets
- XR™ lithium-ion batteries with fuel gauge provide 33% more capacity over standard packs
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2121437 |
| Fastenal | 2121437 |
| Fastenal | 2121437 |
| Fastenal | 2121437 |
-
UNSPSC27112713
-
Standards/ApprovalsCSA Certified
Recently Viewed
DeWALT® 20V MAX* MATRIX™ DCF880HM2 Compact Lightweight Cordless Impact Wrench Kit With Hog Ring Anvil, 1/2 in Square Drive, 1800 in-lb Torque, 20 VDC, 5-3/4 in OAL
Dichtomatik 75102174 O-Ring, 252 Dash Number, 5.234 in ID x 5.512 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
40-B-24-F-7/8 24 Tooth Sprockets For #40
24 TOOTH SPROCKETS FOR #40 CHAIN-IDC40B24F7/8 >
MAX LITE UNCORDED EAR PLUGS (PR) - HOWLPF1 >
ASP-752-S Industry Standard Clamping Collar, 2-Piece Construction, 3/4 in ID x 1-1/2 in OD x 1/2 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.


