Milwaukee® 2967-20 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2400 ipm, 1200 ft-lb Fastening/1600 ft-lb Nut-Busting Torque Rating, 18 V, 7.6 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Friction Ring design allows for quick & tool-free socket changes.
-
BrandMilwaukee®
-
UPC045242601554
-
Manufacturer Part Number2967-20
-
CountryUSA|Canada
-
Torque Rating1200 ft-lb Fastening/1600 ft-lb Nut-Busting
-
TypeHigh Torque
-
Voltage Rating18 V
-
Control Type4-Mode Drive
-
SeriesM18 FUEL™
-
Housing MaterialGlass Filled Nylon/Aluminum
-
Bare Tool/KitBare Tool
-
Battery IncludedYes
-
Battery TypeM18™ REDLITHIUM™
-
Dimensions9.35 in H x 3.13 in W
-
Speed0 to 2000 rpm
-
Blows per Minute0 to 2400 ipm
-
Drive Size1/2 in
-
Drive TypeSquare
-
Overall Length7.6 in
- Most Power-Dense Design - Combines 1,200 ft-lbs fastening and 1,600 ft-lbs nut-busting torque
- Compact 7.6 in Length - Delivers maximum access in tight spaces with full power
- Fastest Bolt Removal - Increases productivity on the jobsite and in the shop
- POWERSTATE Brushless Motor - Provides unmatched power and durability under heavy load
- Patented Battery Isolation System - Ensures secure pack connection and reduces vibration
- Tri-LED Lighting System - Delivers high-definition visibility with minimal shadows
- Bolt Removal Mode - Breaks stubborn bolts loose, then slows for controlled removal
- AUTO-SHUTOFF Control - Prevents over-tightening with precise 50 ft-lbs torque limit
- REDLINK PLUS Intelligence - Protects from overload, heat, and over-discharge
- M18 REDLITHIUM System - Compatible with all M18 batteries and chargers
- Compatible with all M18 batteries and chargers
-
Alternative Part Number20678087
-
IDEA Index ID20678087
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Warranty5 Year Limited Warranty
-
UNSPSC27112713
-
Owners/User Manual
Recently Viewed
Milwaukee® 2967-20 M18 FUEL™ High Torque Impact Wrench, 1/2 in Drive Square Drive, 0 to 2400 ipm, 1200 ft-lb Fastening/1600 ft-lb Nut-Busting Torque Rating, 18 V, 7.6 in OAL
The MILWAUKEE® M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring is the most power-dense impact wrench in its class, provides greater access in tight spaces, and maximizes productivity through faster removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,200 ft-lbs of Fastening Torque and 1,600 ft-lbs of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ Batteries, while the compact size at 7.6" in length gives users greater access in tight spaces. The M18 FUEL™ ½” High Torque Impact Wrench w/ Friction Ring maximizes productivity on the jobsite and in the shop by removing stubborn bolts and fasteners faster than cordless competitors. The patented battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 50 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. The ½” Friction Ring design allows for quick & tool-free socket changes.
MORSE® 11082 1322 General Purpose Taper Length Drill, #29 Drill - Wire, 0.136 in Drill - Decimal Inch, 5-3/8 in OAL, HSS, Black Oxide
Square D™ QO330 Standard Miniature Circuit Breaker, 240 V AC, 30 A, 10 kA Interrupt, 3 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 3 pole QO circuit breaker is rated at 30A at 120/240VAC. This unit provides 10kA breaking capacity and plug in mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
TXT926AT Dodge® Torque-Arm™ II 904002 Heavy Duty Single and Double Reduction Speed Reducer, Solid Shaft Input, Tapered Hollow Bore Output, 20 hp, 15:1 Gear
With 60 years of proven dependability and more than 1.8 million units in service throughout the world, Dodge® Torque-Arm™ speed reducers are the standard of the industry and the benchmark to which others are compared. The Torque-Arm™ II is a shaft mount helical gear reducer that mounts directly to the driven shaft with a number of accessories available to produce versatility, cost savings and long life. A long list of standard features makes this reducer suitable for a wide range of environments right off the shelf.
FYH® SA206 20FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SA206 20FP9 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
B-Line Split Pipe Clamp, Hinged Extension, Series: B3198H, 1/2 in Pipe/Tube, 3/8-16 Rod, 180 lb, Malleable Iron, Plain, For Use With: Pipe Hanger and Mechanical Clamp
