Apex® 492-AI Screwdriver Bit, #2 Phillips® Point, 2.75 in OAL
Apex® 492-AI Screwdriver Bit, #2 Phillips® Point, 2.75 in OAL
-
BrandApex®
-
UPC697099282945
-
Manufacturer Part Number492-AI
-
CountryUSA
-
Point Size#2
-
Point TypePhillips®
-
MaterialSteel
-
Shank Size1/4 in
-
Shank TypeHex
-
Overall Length2.75 in
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Power Bits Are Best Used With Quick-Release (QR series) Chucks
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 165GG6 |
-
Package DescriptionEACH
-
Owners/User Manual
Recently Viewed
Apex® 492-AI Screwdriver Bit, #2 Phillips® Point, 2.75 in OAL
Apex® 480-FX Insert Screwdriver Bit, Frearson Point, 1.375 in OAL
Apex® 49-10IPX Screwdriver Bit, 10IP Torx Plus® Point, 1.93 in OAL
GENERAL® CT101 Line Voltage Tester, 80 to 500 VAC/VDC Max Measurable
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
Proto® J1284 Combination Wrench, 2-9/16 in Wrench, 12 Points, 15 deg Offset, 29-3/4 in OAL, Alloy Steel, Satin
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
