Black&Decker 3-1/2"-L #2 PHIL IMPACT BIT--PK/5 BD- DW-AF-3-PH-2-IR-5
DeWALT® DWAF3PH2IR5 Screwdriver Bit, #2 Point Phillips® Point, 3.5 in OAL
-
BrandDeWALT®
-
Manufacturer Part NumberDWAF3PH2IR5
-
CountryUSA
-
FinishBlack Manganese Phosphate
-
Point Size#2
-
Point TypePhillips®
-
MaterialSteel
-
ColorBlack
-
Shank Size1/4 in
-
Shank TypeHex
-
Overall Length3.5 in
- Overhauled Phillips 2 Geometry For 100 Percent More Screws Per Bit
- Flextorq Zone Flexes and Absorbs Impact For 200X Longer Life
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 811EK3 |
-
Package DescriptionEACH
Recently Viewed
DeWALT® DWAF3PH2IR5 Screwdriver Bit, #2 Point Phillips® Point, 3.5 in OAL
GP® CH105 Chisel, Flat, 3/4 in Tip, 18 in OAL
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
GearWrench® 86950 Combination Wrench, 13/16 in Wrench, 12 Points, 15 deg Offset, 12 in OAL, Alloy Steel, Polished Chrome, ANSI/ASME
GEARWRENCH 90-tooth ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improved reach, leverage, and comfort. Large color-coded SAE/metric markings make size identification easy. All exceed ASME performance specs and come with the trusted GEARWRENCH Full Lifetime Warranty.
Milwaukee® 48-62-2030 Flat Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1 in W Blade, 18 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
#12 Stainless Steel Flatwashers
