Irwin® Hanson® 53404 534 EX-4 Spiral Flute Screw Extractor, #4 Extractor, 1/4 in Drill, For Screw Size: 9/32 to 3/8 in, 1/8 in NPT, 1/8 in BSP, 8 to 10 mm, 2-7/8 in OAL, 1/4 in Shank
IRWIN Spiral Flute Screw Extractors - 534/524 Series.
-
BrandIrwin® Hanson®
-
UPC042526534041
-
Manufacturer Part Number53404
-
CountryUSA
-
MaterialCarbon Steel
-
For Screw Size9/32 to 3/8 in, 1/8 in NPT, 1/8 in BSP, 8 to 10 mm
-
TypeEX-4 Spiral Flute
-
Series534
-
Shank Size1/4 in
-
Drill Size1/4 in
-
Overall Length2-7/8 in
-
Extractor Size#4
- Designed to remove broken studs, bolts, socket screws and fittings
- Aggressive left hand spiral design for extra gripping power
- Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases
- Extractor size and recommended drill bit size are etched on each tool
- TR-88 recommended tap wrench
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 75227926 |
-
UNSPSC27111709
-
Package Description1/PK
-
WarrantyLimited
Recently Viewed
Irwin® Hanson® 53404 534 EX-4 Spiral Flute Screw Extractor, #4 Extractor, 1/4 in Drill, For Screw Size: 9/32 to 3/8 in, 1/8 in NPT, 1/8 in BSP, 8 to 10 mm, 2-7/8 in OAL, 1/4 in Shank
IRWIN Spiral Flute Screw Extractors - 534/524 Series.
3/8" X 6" MAGNETIC HOLLOW NUT DRIVER-KLE6463/8M >
Milwaukee® M4™ 2101-22 Cordless Screwdriver Kit, 1/4 in Chuck, 4 V DC, 44 in-lb Torque, Li-Ion Battery
With the introduction of the new M4™ 2-speed screwdriver, Milwaukee Tool commits to a new line of cordless products in the 4 V category utilizing the company’s REDLITHIUM 2.0 battery technology. The new screwdriver incorporates the latest Milwaukee core technologies in motor, REDLITHIUM™ intelligence electronics and REDLITHIUM 2.0 batteries, increasing the tool’s power and run-time, while shrinking its size. Featuring 44 in-lbs of peak torque and a 21-position clutch with auto shut-off, the new screwdriver offers improved torque control during repetitive applications. Two speeds, 200 and 600 RPM, offer further user control for precision work. At only 244 millimeters in length and under one pound, the M4™ screwdriver is easy to use with one hand, featuring 1/4 in. quick-change chuck for one-handed bit changes.
Proto® DuraTek™ JC31606R Screwdriver, 3/16 in Slotted Point, Alloy Steel Shank, 10-1/4 in OAL, Black Oxide/Polished Chrome, ASME B107.15
Proto® DuraTek™ JC31606R Screwdriver, 3/16 in Cabinet/Slotted Point, Alloy Steel Shank, 10-1/4 in OAL, Black Oxide/Polished Chrome, ASME B107.15
Klein® Cushion-Grip® 600-6 Heavy Duty Screwdriver, 5/16 in Slotted Point, Steel Shank, 10.938 in OAL, Rubber Handle, Polished Chrome, ANSI/ASME Specified
Klein Tool's 5/16-Inch (8 mm) Keystone Screwdriver with 6-Inch square shank is designed for the most demanding uses. It has a Cushion-Grip™ handle for greater torque and comfort. Meets or exceeds applicable ASME / ANSI specifications and has Tip-Ident® that quickly identifies the screwdriver type and tip orientation.
Crescent® 0290FCS Lightweight Hand Operated Cutter, 500 kcmil Copper, 750 kcmil Aluminum, 1-3/8 in Communications Cable Cable/Wire, 25-1/2 in OAL, Shear Cut, Forged Alloy Steel Jaw
Face the storm with confidence with Crescent H.K. Porter's line of Fiberglass Cable Cutters. Featuring grips that are specifically designed for multiple cutting positions, ultimately reducing fatigue and enhancing control. H.K. Porter blades are forged and machined in the USA with precision heat treatment which allows for longer blade life. The jaw pivot geometry has been optimized for a lower force to cut over the tool's life. Cut soft materials (31HRC) up to 1/2" or 13mm thick, medium materials (42HRC) up to 7/16" or 11mm thick, and hard materials (48HRC) up to 3/8" or 10mm thick with the 30" fiberglass bolt cutter.
