Milwaukee® 5342-21 Dual Mode Corded Rotary Hammer Kit, 2 in Keyless Chuck, 975 to 1950 bpm, 125 to 250 rpm No-Load, 6 in Max Core Bit Compatibility, 2 in Max Solid Bit Capacity, 27-1/2 in OAL
Perform a variety of digging and drilling jobs on floors or the ground with this heavy-duty inline design. The 2 in. SDS-Max drive rotary hammer delivers 19.9 ft-lbs of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The inline design offers more comfortable operation, and the soft-grip side handle can be attached in three positions – plus the rear switch handle – to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable-speed dial for optimum control, a service-reminder light and easy access for maintenance. You can position chisels more efficiently with the SDS-Max bit holder system. The tool uses standard SDS-Max accessories, and comes with a carrying case.
-
BrandMilwaukee®
-
UPC045242024001
-
Manufacturer Part Number5342-21
-
CountryUSA|Canada
-
Max Core Bit Compatibility6 in
-
Tool/KitKit
-
Chuck Size2 in
-
Maximum Solid Bit Capacity2 in
-
Chuck TypeKeyless
-
Torque Rating19.9 ft-lb
-
TypeDual Mode
-
ReversibleNo
-
Handle TypeD-Handle/In-Line/Soft Grip/Side
-
Voltage Rating120 V AC
-
Control TypeVariable Speed Trigger Switch
-
No-Load Speed125 to 250 rpm
-
Amperage Rating15 A
-
Housing MaterialMetal/Nylon
-
Impact Energy19.9 ft-lb
-
Number of Speeds2
-
Blows per Minute975 to 1950 bpm
-
Overall Length27-1/2 in
- Comfortable inline design, Three handle positions offer greater user comfort
- Heavy-duty robust construction, Digs and drills under the most demanding jobsite conditions
- Powerful 15 Amotor, Delivers 19.9 ft-lbs of blow energy
- Service reminder light, Indicates when service will be needed
- Vibration Isolation System, Minimizes vibration for less operator fatigue
- Uses standard SDS max accessories
- Powerful 15 A motor - delivers 19.9 ft-lbs of blow energy
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4YE55 |
| Fastenal | 0203909 |
-
Alternative Part Number8564867
-
UNSPSC20111611
-
IDEA Index ID8564867
-
IncludesCarrying Case
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|ETL Listed|UL Listed
-
Warrantyhttps://milwaukeetool.widen.net/content/rtxhp3o2sq/jpeg/5%20Year%20Tool_Warranty.jpg?w=2000&h=2000&position=c&color=ffffff00&quality=100&retina=true&u=uqymji|5 Year Tool_Warranty.jpg|5 Year Limited Warranty
Recently Viewed
Milwaukee® 5342-21 Dual Mode Corded Rotary Hammer Kit, 2 in Keyless Chuck, 975 to 1950 bpm, 125 to 250 rpm No-Load, 6 in Max Core Bit Compatibility, 2 in Max Solid Bit Capacity, 27-1/2 in OAL
Perform a variety of digging and drilling jobs on floors or the ground with this heavy-duty inline design. The 2 in. SDS-Max drive rotary hammer delivers 19.9 ft-lbs of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The inline design offers more comfortable operation, and the soft-grip side handle can be attached in three positions – plus the rear switch handle – to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable-speed dial for optimum control, a service-reminder light and easy access for maintenance. You can position chisels more efficiently with the SDS-Max bit holder system. The tool uses standard SDS-Max accessories, and comes with a carrying case.
Sealmaster® 550253 RFB Non-Expansion Round/Straight Bore Tapered Roller Bearing unit, 2-3/16 in Dia Bore, 4-7/8 in L Bolt Center-to-Center, 4-Bolt Flange Mount, 6-1/4 in OAL/Dia
Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive Type E bearings. The exclusive features include unitized replaceable inserts, self aligning capability, split housing and the Sealmaster® alignment pin which provides for a direct path for lubrication into the bearing and helps prevent outer ring rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric with a wide variety of housing, sealing and lubrication options.
Proto® J3552 Ultra Thin Pattern Service Wrench, 1-5/8 in Wrench, Federal GGG-W-636E, Imperial, 30 deg Offset, 7-5/8 in OAL, Alloy Steel, Satin
Stanley® Proto® was the first company to market the combination wrench in the United States in 1933. Since then, we have greatly expanded our line of wrenches and developed a range of new products. Our line now includes standard, extra long and short combination, flex head, open end, angle head, box, deep offset box, ratcheting box, obstruction, adjustable, flare nut, striking, slugging, construction, spanner and pipe wrenches. In other words, we have a wrench for nearly any fastener.
MCR Safety 96699XS NXG® General Purpose Gloves, XS, Polyester, Knit Wrist Cuff, Resists: Abrasion/Puncture
MCR Safety NXG® Work Gloves 13 Gauge Black Polyester Shell Black Polyurethane (PU) Palm and Fingertips NXG provides premium quality, comfort and fit making it the best choice for long work days The next generation of gloves requires the next generation in manufacturing. MCR Safety’s state-of-the-art manufacturing facility produces premium NXG® brand gloves with advanced coatings, utilizes 21st-century manufacturing efficiencies, and does so with environmentally friendly production methods. Our NXG® styles are well suited for multi-industrial applications that require high dexterity and comfort and are manufactured on seamless knit liners that are flat dipped to reproduce the natural curved shape of the hand. As a result, workers benefit from less hand fatigue and greater productivity while performing detailed tasks to heavy duty jobs. The 96699 features a seamless 13-gauge black polyester shell and black polyurethane (PU) coated palm and fingertips that will enhance gripping power. If you are looking for the best work gloves, be sure to check out MCR Safety's NXG® options! To learn more, visit our NXG® landing page here.
Dykem® BRITE-MARK® 84004 General Purpose Permanent Paint Marker, Medium Tip, Aluminum, Yellow
Dykem® BRITE-MARK® 84004 General Purpose Permanent Paint Marker, Medium Tip, Aluminum, Yellow
BBI 847244 Partially Threaded Cap Screw, 7/16-14, 4-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847244 Partially Threaded Cap Screw, 7/16-14, 4-1/2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
