Milwaukee® 2807-22 M18™ FUEL™ Hole Hawg™ Cordless Right Angle Drill Kit, 1/2 in Keyed Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery
Milwaukee®, WI - Milwaukee® tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18™ FUEL™ Hole Hawg™ with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ brushless motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™® is the fastest in applications when drilling 7/8 in ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7 lb. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™ is able to drill up to 220 7/8 in holes with a ship auger on a single charge.
-
BrandMilwaukee®
-
UPC045242560387
-
Manufacturer Part Number2807-22
-
CountryUSA
-
Chuck Size1/2 in
-
Chuck TypeKeyed
-
ColorBlack/Red
-
TypeCordless
-
Handle TypeErgonomic
-
Voltage Rating18 V
-
No-Load Speed1550 rpm
-
SeriesM18™ FUEL™ Hole Hawg™
-
Bare Tool/KitKit
-
Battery Capacity6 Ah
-
Battery IncludedYes
-
Battery TypeLi-Ion
-
Dimensions3.7 in W x 6.5 in H
-
Overall Length15.6 in
- Fastest rough-ins
- Lightest right angle drill
- Up to 220 7/8 in holes per charge
- All metal 1/2 in keyed chuck
- POWERSTATE™ brushless motor provides constant power under heavy load to power through 2-9/16 in holes
- REDLINK PLUS™ intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 battery pack delivers over 220 7/8 in holes per charge and has 50% more power and runs 50% cooler vs REDLITHIUM™ XC
- LED light to illuminate the work area
- Compatible with all M18™ batteries
- Ergonomic top handle for maximum comfort
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 60YT05 |
-
Alternative Part Number16712675
-
UNSPSC27112703
-
IDEA Index ID16712675
-
Includes(1) 2807-20 M18™ FUEL™ Hole Hawg™ 1/2 in Right Angle Drill, (1) 48-59-1812 M18™ M12™ Multi-Voltage Rapid Charger, (2) 48-11-1862 M18™ REDLITHIUM™ HIGH OUTPUT™ XC6.0 Battery Pack, (1) Contractor Bag and (1) Chuck Key
-
Standards/ApprovalsUL Listed
-
SDS
Recently Viewed
Milwaukee® 2807-22 M18™ FUEL™ Hole Hawg™ Cordless Right Angle Drill Kit, 1/2 in Keyed Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL, Li-Ion Battery
Milwaukee®, WI - Milwaukee® tool continues to innovate in a category they invented 70 years ago by delivering ground-breaking performance with the introduction of the next generation of M18™ FUEL™ Hole Hawg™ with the power and speed to replace corded right angle drills. Designed from the ground-up with an upgraded POWERSTATE™ brushless motor and optimized REDLINK PLUS™ electronics and paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™® is the fastest in applications when drilling 7/8 in ship augers, delivering the ability to perform the fastest rough-ins in the industry. The tool is the lightest in class at around 7 lb. When paired with the kitted paired the REDLITHIUM™ HIGH OUTPUT™ 6 Ah batteries, the new M18™ FUEL™ Hole Hawg™ is able to drill up to 220 7/8 in holes with a ship auger on a single charge.
Dichtomatik 75115253 O-Ring, 243 Dash Number, 4.109 in ID x 4.387 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
1/4" MEXICAN SISAL ROPE--50' PER ROLL-JWH739954 >
Dichtomatik 75122141 O-Ring, 17 mm ID x 22 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 402063 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 402063 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
